Mark this thread as Unsold
Tial 44mm Wastegate, Red
Thread Starter
Evolved Member
iTrader: (35)
Joined: Apr 2006
Posts: 700
Likes: 3
From: Highlands Ranch, CO
Tial 44mm Wastegate, Red
Tial 44mm (V44) Wastegate
Color=red
Double blue springs (20.3 psi) highest possible
(I have other springs I will include if you're looking for something lower)
Snapped a quick picture of it installed. Will take some more after I get it off the car tomorrow.
Works perfect, will guarantee.
Pic from the Tial site:
Specs:
- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Color anodized aluminum actuator (Red).
SOLD
Color=red
Double blue springs (20.3 psi) highest possible
(I have other springs I will include if you're looking for something lower)
Snapped a quick picture of it installed. Will take some more after I get it off the car tomorrow.
Works perfect, will guarantee.
Pic from the Tial site:
Specs:
- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Color anodized aluminum actuator (Red).
SOLD
Last edited by rodent; Sep 23, 2010 at 08:01 AM.
Thread Starter
Evolved Member
iTrader: (35)
Joined: Apr 2006
Posts: 700
Likes: 3
From: Highlands Ranch, CO
I have the outlet flange and both vband clamps. No inlet flange but that usually comes with the header. Do you need the inlet flange? I'll look through stash of parts just to be sure.
