I have had this on my car for about 35k and decided it was time for a change.
This was purchased from FP as it was on their shop car a few years ago.

Its a 3071R and it made 385hp and 325tq on 93 pump on my car with minimal mods.
Everything works and there is no play in the turbo. The wheel does have a chip in it so I would recommend having it sent to FP for an upgrade to HTA for $600.00
I tried to get good pictures of the wheel, it has never touched the housing so you could just replace the wheel if you wanted to go that route as well. Always run with a filter so I am not sure why it has a chip.

Comes with cast coated manifold,trimmed OEM heat shield, O2 housing, 3071 turbo, 38mm tial waste gate, dump tube (not re-routed), oil feed with filter and oil return line.


I can even ship the turbo to FP and have the rest shipped to you if you want to do that.

 

PM's replied.

 

Bump

 

Lots of interest but no locked in buyers.
Enjoy a great turbo at a low price.
You will need new gaskets, you can trim your stock fan or use a slim line.

 

More questions answered asked so i figured i would post up answers.

This was used with Injen piping so it should work with most.
I will also through in a 3" intake pipe to make the setup easier to bolt on. I do not have a filter for it though.

I have had a lot of interest and PM's about this kit. It makes great power and is upgradeable to a larger size for more power.

Both oil feed and return are included to help make it a bolt on affair.
Made 385 on a low reading mustang Dyno, others have made right at 400 whp on a dynojet.

 

Back up forsale. Buyer backed out and lost deposit.
This is now a steal for a complete turbo kit (minus gaskets) since I discounted the deposit off the price.

 

This turbo is also upgradable to any variant BB turbo for little money from FP.
You could have a high HP kit like an HTA35r etc.

 

Lots of PM's but I do still have this.