Selling because I'm getting a slightly bigger turbo with a bigger inlet and this isn't going to work out for me. Other then that, it has worked fine and fitment was just fine for me. had it on my car ever since I bought the car, which was 3 years ago. Inlet coupler is just dirty as I just sprayed it with brake cleaner. The bottom nipple broke off and is missing but you can get a fabricator to weld you a new one (the old one was only held on by a piece of rubber and the nipple was plastic). I just taped off this hole since I had an MBC and didn't have a need for the hole. The long tube is for the breather hole. Since the rubber hose was smaller than the inlet hole on the intake, I had to force it to fit and put a clamp on it. It's also missing a few clamps.

It WON'T come with a filter. I just had it there to hold it up to take a pic. You will have to find your own MAF adapter plate and whatnot to make this work. What you see is what you get.

Asking $30 shipped.
SOLD

 

Forgot I had this listed. Bump.