Mark this thread as Unsold
Kelford 272, Fidanza, Supertech..
Thread Starter
Joined: May 2010
Posts: 282
Likes: 3
From: Sayreville,NJ
Kelford 272, Fidanza, Supertech..
Hello, I purchased these goodies right here from the forum but decided to go another route. I am just looking to break even or very close to it. A little flexible with prices..
Prices include shipping, Add 3% for Paypal. Thanks
First up is a set of Kelford 272's with low mileage, just some very slight wear marks on the lobes. I was told they were installed for less then a month. Cams are for an VIII, 460.00
2nd.. A set of Fidanza cam gears.. was told they only have 200 miles but they have a few nicks in the anodozing that I assume is from laying on a bench..lol 160.00
3rd.. Supertech dual valve springs and retainers with new seals. around 5000 miles... 275.00
Prices include shipping, Add 3% for Paypal. ThanksFirst up is a set of Kelford 272's with low mileage, just some very slight wear marks on the lobes. I was told they were installed for less then a month. Cams are for an VIII, 460.00
2nd.. A set of Fidanza cam gears.. was told they only have 200 miles but they have a few nicks in the anodozing that I assume is from laying on a bench..lol 160.00
3rd.. Supertech dual valve springs and retainers with new seals. around 5000 miles... 275.00
Last edited by mcm308; Sep 15, 2011 at 03:03 PM.
Thread Starter
Joined: May 2010
Posts: 282
Likes: 3
From: Sayreville,NJ
The blue mark is a mark the the factory uses.. I have not used the fidanza gears so I really can't comment on them. I have seen them on some very high hp cars so I figured if they use them, they are good enough for me...
Thread Starter
Joined: May 2010
Posts: 282
Likes: 3
From: Sayreville,NJ