Mark this thread as Sold
O2 dump 4 bolt to 3" V band
Im Not trying to ruin your sale here, but i think you don't know what youre selling. Thats a 90 degree outlet for a GT30/Gt35 4 bolt turbing housing. The Vband system was installed improperly that the inlet side of the V-band flange when the outlet Vband flange should have been installed. A brand new peice could be constructed for $200 using 304L Stainless. If not for lees. The turbo flange is 50, the Vband flange is 30, the pipe is 40 the o2 bung is 10. Labor and welding material should be about 70 dollars. Because Of the ammount of surface contamination your peice i would assume its a 400 series stainless and not a 300 series.
The difference between inlet and outlet vband flanges are the groves and tounges that are on the flanges. the one with the grove is the inlet.
The difference between inlet and outlet vband flanges are the groves and tounges that are on the flanges. the one with the grove is the inlet.
Thread Starter
Evolving Member
iTrader: (56)
Joined: Jun 2009
Posts: 138
Likes: 0
From: Florida 34609
You are 100% correct, I do not know about this piece, hence the posts I've previously made. I know it didn't work for my set up and have listed that. I appreciate your info.
