Mark this thread as Sold
6spd transmission (and/or 6spd mount, clutch fork, speed sensor, reverse sensor)
Thread Starter
Evolved Member
iTrader: (34)
Joined: May 2010
Posts: 1,142
Likes: 46
From: Bethesda, MD
6spd transmission (and/or 6spd mount, clutch fork, speed sensor, reverse sensor)
Selling my 6spd trans for $250 + shipping + paypal. It has a whine (see vid) and had metal dust in the fluid when it was drained. Shifts and drives completely fine and still has every gear without issue. I drove it another 600 miles as is. It most likely needs just new bearing(s) but I can't guarantee it. The only other thing to mention is the bell housing has a small crack in it, the raised edge is like 2 finger nails thick. I included a pic. I can ship it to sheptrans or have someone local (the shop that works on my car) rebuild it. Let me know what you want.
Sorry for the bad cell phone pics but this should give you an idea. I also have a 6spd stock mount, clutch fork, speed sensor, and reverse sensor that I can include, or sell separately.
http://youtu.be/6eLEBhPOMEU
Sorry for the bad cell phone pics but this should give you an idea. I also have a 6spd stock mount, clutch fork, speed sensor, and reverse sensor that I can include, or sell separately.
http://youtu.be/6eLEBhPOMEU
Thread Starter
Evolved Member
iTrader: (34)
Joined: May 2010
Posts: 1,142
Likes: 46
From: Bethesda, MD
BUMP.
I'm going to take better pics of the bell housing this week. Honestly its not a big deal, with 3 people taking out the trans only I noticed it. And it doesn't compromise the structure of the bell housing. I've ran with it like that for 2 yrs. It can easily be welded and grinded down. Last but not least, you could always bolt your bell housing to it.
I'm going to take better pics of the bell housing this week. Honestly its not a big deal, with 3 people taking out the trans only I noticed it. And it doesn't compromise the structure of the bell housing. I've ran with it like that for 2 yrs. It can easily be welded and grinded down. Last but not least, you could always bolt your bell housing to it.
Thread Starter
Evolved Member
iTrader: (34)
Joined: May 2010
Posts: 1,142
Likes: 46
From: Bethesda, MD
Yes $250 US. And not going to lie the shipping will probably be expensive. Plattsburg, NY is an hr from where I live so most likely I'll drive it there and ship it on a weekend. But I need a box. And one person is tentative on taking it from Toronto already.
If you're serious about your inquiry I'll look into everything. Nothing is certain so far.
If you're serious about your inquiry I'll look into everything. Nothing is certain so far.
Thread Starter
Evolved Member
iTrader: (34)
Joined: May 2010
Posts: 1,142
Likes: 46
From: Bethesda, MD
I just google mapp'd where you live. For you I can actually drive it very close to where you are. I was just in Trenton, NJ on saturday actually. And I make trips down there for family semi-frequently. So if you cover my $150 gas bill I'd be willing to meet much closer to your area.
Thread Starter
Evolved Member
iTrader: (34)
Joined: May 2010
Posts: 1,142
Likes: 46
From: Bethesda, MD
More pics! Specifically of the bell housing. The "crack" doesn't go all the way through and its splintered edge is barely as high as a penny. The inside of the bell housing looks perfect.
Also, I found this in the storage:
This is another 6spd 05 evo MR tranny. JA3AH86D35U011403. THIS IS NOT MINE. No one knows why its here or wth is wrong with it. But there is a possibility that I can get the bell housing from this one. I don't know who owns it (the shop or another customer) and all the labour and price of the bell housing has to be covered by the buyer.
Also, I found this in the storage:
This is another 6spd 05 evo MR tranny. JA3AH86D35U011403. THIS IS NOT MINE. No one knows why its here or wth is wrong with it. But there is a possibility that I can get the bell housing from this one. I don't know who owns it (the shop or another customer) and all the labour and price of the bell housing has to be covered by the buyer.