Mark this thread as Unsold
!!Custom Twin Scroll Part Out!! (ETS, TIAL, SparkTech)
Aug 11, 2012, 11:01 AM
#32
Evolved Member
Thread Starter
iTrader: (32)
Join Date: Mar 2005
Location: PottsVegas, PA
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
Aug 11, 2012, 11:18 AM
#33
Evolved Member
Thread Starter
iTrader: (32)
Join Date: Mar 2005
Location: PottsVegas, PA
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
Great question!
Details for the turbo are as follows:
Garrett Twin Ball Bearing 35R Turbo
Compressor
.60 A/R
35R exducer with a clipped inducer to maximize spool characteristics (less inertia)
Turbine
.84 A/R
35R turbine with clipped exducer for less inertia and proper flow characteristics
The manifold, gasket, and twin scroll turbine housing are all port matched. This turbo was created for the Evo motor specifically. With the intention of building the motor, this turbo will provide a very large power band, with the area UNDER the curve in mind. It will continue to make power beyond 8,000 on a 2.0 liter motor, and will easily make solid power to 8,000 on a 2.3 motor.
It was designed to provide enough capacity to properly process air through the head and turbo with a future build. (Larger Camshafts/slight head port/etc.)
I was intending on matching this kit with a stroker motor, which would provide stock like spool with double the power, at least. You can essentially do anything (Street, Track, and Drag Strip) with this kit.
Details for the turbo are as follows:
Garrett Twin Ball Bearing 35R Turbo
Compressor
.60 A/R
35R exducer with a clipped inducer to maximize spool characteristics (less inertia)
Turbine
.84 A/R
35R turbine with clipped exducer for less inertia and proper flow characteristics
The manifold, gasket, and twin scroll turbine housing are all port matched. This turbo was created for the Evo motor specifically. With the intention of building the motor, this turbo will provide a very large power band, with the area UNDER the curve in mind. It will continue to make power beyond 8,000 on a 2.0 liter motor, and will easily make solid power to 8,000 on a 2.3 motor.
It was designed to provide enough capacity to properly process air through the head and turbo with a future build. (Larger Camshafts/slight head port/etc.)
I was intending on matching this kit with a stroker motor, which would provide stock like spool with double the power, at least. You can essentially do anything (Street, Track, and Drag Strip) with this kit.
Aug 15, 2012, 06:20 AM
#37
Evolved Member
Thread Starter
iTrader: (32)
Join Date: Mar 2005
Location: PottsVegas, PA
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
If you are interested in this kit everybody, show me your interest now, as this kit may be going far far away soon. Don't wait any longer!
PMs replied!
PMs replied!
Aug 15, 2012, 10:02 AM
#38
Evolved Member
Thread Starter
iTrader: (32)
Join Date: Mar 2005
Location: PottsVegas, PA
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
All packed up and ready for immediate shipment! Who is ready for a new turbo kit in the next few days?!
Packaged with peanuts, newspaper, clipper magazines, excess cardboard, beer cartons, bubble wrap and all the goodies for a safe delivery!
Packaged with peanuts, newspaper, clipper magazines, excess cardboard, beer cartons, bubble wrap and all the goodies for a safe delivery!
Last edited by xiaoni420; Oct 4, 2012 at 04:32 PM.
Aug 22, 2012, 06:17 AM
#45
Evolved Member
Thread Starter
iTrader: (32)
Join Date: Mar 2005
Location: PottsVegas, PA
Posts: 1,675
Likes: 0
Received 0 Likes
on
0 Posts
Just a reminder to all, there will no be a part out of any kind with this kit. I have appreciated all the inquiries regardless! Have a good Wednesday!