the crank would be 100mm since it's a 2.3

 

Thanks, the crank is a 100mm like you said since it's a 2.3l.

This is the part number for the crank: M10004G63 which makes it not the light weight one.

And as far as the answer between which BR engine it is... neither of the ones posted..

I would not recommend keeping it below 9k rpm.

 

i think the Manley H beams are good to 500ft-lb

that crank is a nice piece.,billet.

 

The H-plus supposedly hold up to mid 700ft-lb or so I was told by AMS?

 

bump.

 

i think the H-plus is the H-beam with ARP 2000 rod bolts,but for all i know the bolts could be the weak point of the H-beam rod,so maybe AMS is correct.

either way,it's a nice build and the crank is billet as far as i can tell instead of forged like you said.that's a huge bonus on a stroker.the crank is a $1500 item alone.

 

bump.

 

PM Sent.... How much HP can this handle

 

PMed.

 

Need this gone. $2750 shipped within the lower 48 + paypal fee.

 

was the crank new at time of install?

 

yes it was

 

BUMP $2650 shipped within the lower 48 states. My school bill is due so I need this gone ASAP!

 

Bump

 

What were the specs on the ring gap