Mark this thread as Unsold
Billet Wheel T3 Turbo Kit JDL
Its basically a GTX35R. Precision makes Aftermarket Replacement turbos that would be direct swaps if you currently run a Garrett unit. 62mm CEA Billet Wheel with a 68.0mm 84 trim turbine wheel. They dont give flow rating but its rated just under their 6262
These as well as the Garrett units are a little more compact compared to the traditional 6262. The normal Precisions are about 5/8 wider than these
These as well as the Garrett units are a little more compact compared to the traditional 6262. The normal Precisions are about 5/8 wider than these
Then I'm assuming it might spool a tad bit quicker than a 6262 I have an ets kit with the 5857 and is like to upgrade the turbo to something that hits a little harder and I don't want anything that is not hitting full boost over 5 k do you sell just the turbos separate?
Trending Topics
free bump i have checked out your website and is very interested in the forward facing parts kit. my stock turbo is starting to go bad so i will be upgrading here shortly i might buy that parts kit and then grab a 6262 that would be a forward facing kit for about 3000 or less not bad prices at all.
considering that you guys 6262 is 899 and the forward facing kit is only 1649 free bump.
considering that you guys 6262 is 899 and the forward facing kit is only 1649 free bump.