I have an Exedy Twin disk (Exedy part number MM022HD) that needs to be rebuilt. The heavy duty pressure plate is designed to hold 615 torque at the wheels. The flywheel needs to be resurfaced with a step height of 32mm +/-0.01mm. It will include the intermediate plate (IM01). The parts you will need are the front pressure plate (PP02), disc assembly A (DM13DA) and disk assembly B (DM13DA). The kit will include the alignment tool. The front cover is missing one of the wavy springs on the throw out bearing collar, but I suggest you use a total of three springs. The best would be to use ACT’s Monoloc so that the throw out bearing will never pop out of the front cover. $230 Shipped. payment thru paypal must be shipped to the confirmed and verified address on paypal.

 

bump for new price

 

What does it cost to rebuild this thing? What are the steps to do so?

 

I posted the part numbers so you can look up the prices.

 

bump!

 

Do give you guys an idea on the cost, the list is below.

Front pressure plate (PP02) = $165
Disc one (DM13DA) = $240
Disc Two (DM13DA) = $240
Throw out bearing (BRG601) = $38
Flywheel resurface = $50 machine shop average

optional ACT Monolock (884006P) = $65
optional middle plate (IM01) = $150

The lowest price I found on an exedy HD twin disk is $1400 without the monoloc.