Hey everyone,

I have a freshly refurbished Evo 9 head I'd like to sell. This head just came back from my machine shop (some of the pics are from the machine shop as well). The head has been mildly ported, has been pressure tested, has been bead blasted, has been resurfaced, has had all of the guides checked/replaced as necessary, has a fresh 5 angle valve job, +1mm Supertech intake and exhaust valves, Supertech dual spring intake and exhaust valves (have slightly taller seats for more pressure), all new valve seals, new plugs, etc... etc...

I also have Cosworth M2s that were used with this setup. I also have stock lifters that were run with this setup and GSC no-ticks (about 5 minutes of run time on them) that I can sell with the head. I can sell the rockers as well, but am more likely to keep them for my crazier build. I also have a Mivec gear and an exhaust cam gear as well - just depending on what someone may need.

Please let me know if you have any questions or need any additional pics/info. Sorry not all of the pics can have a name/date in them due to the closeness of some pics - mods, please don't delete them because of that.

I'm asking $1,450 OBO + shipping/meet up for the head as pictured. If anyone would like to add the cams, lifters, etc... please ask for that information separately.

Thanks!
Trevor

 

Moar Pictars!

 

Moar Pictars part 2

 

Bump it up

 

How much for the rockers?