Mark this thread as Unsold

WTB[Northeast]: OEM Crank or Billet Crank

Closed Thread Subscribe

Thread Tools

Search this Thread

Dec 3, 2015 | 02:24 AM

SloEvo12

Thread Starter

Newbie

iTrader: (8)

Joined: Dec 2007

Posts: 92

Likes: 0

From: Western PA

OEM Crank or Billet Crank

Hey everyone,

I'm looking to purchase a brand new OEM/billet or well documented used OEM/billet crank. I'm kicking around a Manley or K1 billet cranks. Nothing that has ever been cut or nothing that needs to be cut.

If it's a used crank I would prefer it be somewhere local (Pittsburgh) so I can have my machine shop verify the integrity of the crank. If you're not local to me and it's a used crank, then I would require a full write-up from a machine shop and their contact information to verify - straightness, bearing diameters, magnaflux, etc...

Let me know what you have... searching hasn't netted me much so far. A lot of cranks that have had spun bearings - I already have one of those sitting here that I need to sell!

Thanks!

Dec 3, 2015 | 10:44 AM

morellana

Newbie

iTrader: (6)

Joined: Jan 2009

Posts: 25

Likes: 1

From: florida

have you received any quotes for a new crank?

Dec 3, 2015 | 10:44 AM

morellana

Newbie

iTrader: (6)

Joined: Jan 2009

Posts: 25

Likes: 1

From: florida

message me

Dec 9, 2015 | 12:11 AM

SloEvo12

Thread Starter

Newbie

iTrader: (8)

Joined: Dec 2007

Posts: 92

Likes: 0

From: Western PA

Bump

Dec 20, 2015 | 05:54 PM

CO_VR4

Evolved Member

iTrader: (83)

Joined: Dec 2003

Posts: 2,063

Likes: 5

From: Colorado

I have an OEM 2.0L Evo crank that is at the best crankshaft shop in Denver for inspection and polishing. Standard/standard size bearing surfaces. If you're interested, send me a PM for more details. You would be welcome to confirm condition with the shop before purchase. Check out my feedback for many happy high end parts customers.