When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Name: Mike
Location: North Jersey
Description: I do not know the mileage as it was on the car when purchased.
Reason for sale: Did a nice amount of upgrades and decided to switch to Spoolinup COP. I did not have any issues with the DLI but forums have a huge following with the Spoolinup COP so I wanted to give it a shot.
Price: $150 shipped FIRM. Do not bother negotiating I will not answer back. Find a better price and I will adjust. Retail is $435 before taxes or whatever extra
I have the oem coils and spark plug cover. Just add $15 to cover shipping.
Paypal must send as gift or direct from bank account to save us both from PP fees.
Pictures:
Information
HKS DLI II Twin Power Ignition Amplifier.
- Universal Application. Please confirm compatibility before purchase.
The HKS Twin Power ignition amplifier incorporates both the CDI and transistor method ignition to provide optimum spark duration and maximum voltage output, resulting in crisper throttle response and a smoother engine powerband.
The CDI method, capacity discharge ignition, provides maximum voltage by transferring all stored energy in the capacitor to the ignition coil so that the ignition current can buildup quickly, thus making the Twin Power very effective in the higher revs where a normal spark would tend to diminish. This strong rapid spark prevents the high rpm ignition miss that reduces peak power.
The transistorized method generates high voltage by using transistors to cut off current to the coil, thus allowing for a long energy discharge. This longer spark duration allows the Twin Power to improve lower RPM throttle response and torque.
The combination of the CDI and the transistor method incorporates two distinct systems into one high performance unit, hence the designation of Twin Power.
The Twin Power produces a spark output that is typically 1.5-2.5 stronger than of the stock ignition system and consumes about 35% less power input than other ignition amplifiers. Each compact and attractive Twin power unit is constructed of durable anodized aluminum and sealed to prevent corrosion from moisture.
General wiring harnesses are included in each unit to aid in installation and mounting. Vehicle Specific wiring harnesses are also available for certain models to further aid in installations that require intricate integration. (CARB E.O. # D-186-29)
All Twin Power Units, except for DLI II, are 91mm (L) x 80mm (W) x 34.5mm (H) and weighs Approximately 430g (~15.2oz)
Note: HKS Twin Power Units are not compatible with Non-Resistor Spark Plugs.
*HKS Twin Power ignition amplifiers have been designed to work with vehicles utilizing the OEM ignition system, fuel management, Engine Control Module (ECM) or Electronic Control Unit (ECU) and with vehicles equipped with the HKS F-Con Engine Management system. HKS cannot guarantee compatibility with other aftermarket manufacturer's products.