SOLD

FS: Snow Performance Meth Injection Kit
Price: 200.00 Shipped within USA

The kit was on the Evo for around 2k miles . It was installed by the previous owner and had/still have all the paper work and receipts to prove its condition and mileage. The pump is rated at max pressure 300 psi. It was tuned with 220 psi water/meth (50/50 mix) and has a 325cc jet. The jet/nozzle was installed on the upper intercooler pipe just before the throttle body. I took it off because I’m running the FP Black on stock block and will be tuning the power down for my needs. The car made 556 whp (virtual dyno) on really hot days, more on cooler days.

Everything is included to almost plug in/install this in the trunk and run wiring up to the front of the car. All you have to do is tap where you want to install the jet/nozzle to spray, source for boost line and decide where you want to install the controller. FYI, the controller was installed in my glove box.

As a safety measure, there is a small indicator/bulb wired up that lights up to let you know power is being sent to the pump. The controller is set to have the pump turn on at 18PSI of boost but you can change that to higher or lower psi as you like. Its a $450 kit but you can purchase mine in excellent condition at less than half the price of new. The electrical install is very simple and I’ve labeled all the wiring (Positive and Negatives) to help you with the easy install. Only hard part is taking your time deciding how to run it to neatly tucking it all.

Let me know if you have any questions. Pics below pretty much explains it all regarding the hardware.







Here is a pic of the tank when I had it installed. The pump was where the spare tire was but you can install it higher up if you want to keep the space for a spare.