Tons of Goodies Perrin Intercooler Competition Clutch WORKS DV Etc
Hi Everyone,
Its time I try and sell off some parts I have kicking around to try and save space in the garage as well as free up some cash:thumbup: Everything below was either just taken off my car or has been sitting in my garage waiting to be used. Everything is located in Massachusetts and local pickup would be nice for the larger items but Im happy to ship anything so shoot me a PM and we can discuss. Prices are for item only without shipping and everything is OBO so don't be shy worst I can say is no! Of course if you have any question about anything ask away and Im happy to help answer them! Competition Clutch Stage 2 Sprung Clutch Kit Brand New in Box SOLD Competition Clutch Lightweight Flywheel Only 12k miles on it $150 OEM Flywheel Has about 80k miles on it. $100 WORKS IX Metal Diverter Valve $100 Stock 2005 VIII Turbo With 10.5 Hotside 70k Miles on it. $300 RMR Catback Exhaust for JDM Rear $200 Perrin Intercooler 3.5" $300 3" Test Pipe SOLD OEM Harmonic Balancer Crank Pulley SOLD Stock Radiator and Fan(Does not include controller) $150 OEM Rods & Pistons #4 Rod bearing is gone and was knocking $75 OEM Crank SOLD Right Side Taillight Evodave Painted JDM Replica $50 OEM Driveshaft $75 Competition Clutch Lightweight Flywheel Only 12k miles on it $150 https://cimg5.ibsrv.net/gimg/www.evo...3c346b3448.jpg https://cimg4.ibsrv.net/gimg/www.evo...e8f1f6b150.jpg OEM Flywheel Has about 80k miles on it. $100 https://cimg2.ibsrv.net/gimg/www.evo...f06c2e6622.jpg WORKS IX Metal Diverter Valve. This is based off the IX valve but has been modified to their specs and is supposed to hold over 30PSI. I cant get it to hold over 27PSI without it cracking open. With that being said it works fine just and is pretty much inline with a stock IX valve if not very slight additional holding power. $100 https://cimg3.ibsrv.net/gimg/www.evo...c0a2c0293b.jpg Stock 2005 VIII Turbo With 10.5 Hotside 70k Miles on it. $300 https://cimg8.ibsrv.net/gimg/www.evo...5b446376a8.jpg https://cimg6.ibsrv.net/gimg/www.evo...8a5e370237.jpg Perrin Intercooler 3.5" thick . Its dirty and not perfect has dent on the bottom as shown. Also has been rewelded prior. However it is solid and pressure tested to 35PSI and works great. $300 https://cimg5.ibsrv.net/gimg/www.evo...30a3c72179.jpg https://cimg6.ibsrv.net/gimg/www.evo...1b9800cb26.jpg OEM Rods & Pistons #4 Rod bearing is gone and was knocking $75 https://cimg2.ibsrv.net/gimg/www.evo...0557e488c5.jpg OEM Crank #4 Journal Needs to be polished. I can take more closeups if needbe $100 https://cimg3.ibsrv.net/gimg/www.evo...8305dc9121.jpg https://cimg4.ibsrv.net/gimg/www.evo...b100450074.jpg Stock Radiator and Fan $150 https://cimg7.ibsrv.net/gimg/www.evo...e479600151.jpg https://cimg8.ibsrv.net/gimg/www.evo...7f303dc98b.jpg Right Side Taillight Evodave Painted JDM Replica. There is some hazing on the lens as shown. $50 https://cimg1.ibsrv.net/gimg/www.evo...6595c7ed2e.jpg OEM Driveshaft $75 https://cimg2.ibsrv.net/gimg/www.evo...3a7a12aae8.jpg |
Does the crank need cut or just polished?
|
^Great question. Let me clarify since I may have used the wrong words. I havent mic'd it to compare to the other journals yet. The rod bearing on #4 had excessive play and while it didnt completely spin its done and you can see the heat discoloration. There are no deep gouges so I'd think a polish would suffice but I'll leave that decision to the machine shops of the world.
|
Up
|
Bump
|
Bump
|
To the top
|
Up. Are my prices off or rather marketing skills lacking? Open to offers...
|
Bump
|
Up!
|
Bump
|
would you consider selling only hotside of the turbo
|
Did you ever find out if the crank just needs polished or cut?
|
Originally Posted by Dakota Evo
(Post 11791306)
would you consider selling only hotside of the turbo
Originally Posted by delcster27
(Post 11791365)
Did you ever find out if the crank just needs polished or cut?
|
To the top!
|
All times are GMT -7. The time now is 06:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands