UICP 413 HP - 322 TQ 25Lbs GAS /455HP - 363 TQ E-85(E-71% ETHANOL) Mustang dyno
Map 3.5 Intercooler
MAP Investment Cast
AMS Cold Air Intake , Injector 1000 cc
TiAL Bov 6 spring.
HKS-Super-Turbo-Muffler
AMS Widemouth Downpipe
EBC
Test pipe ,
turbo GTX3076R
Ultimate Racing Upper Intercooler
Chris Carbee ECU Calibrator
E-85 (E-71%) 26lbs








How much HP / TQ is in Dynojet?

 

Nice setup, I’ll bet it moves. Probably makes between 510 and 520whp on a dynojet. Torque is between 400 and 415wtq. Enjoy!

On a side note is your TiAL bov a Q or a QR? And is the turbo a GTX Gen 1 or Gen 2?

 

Is QR and GTX3076R GEN1

 

Probably makes another 20whp if you would have revved it out to the stock 7600rpm limit.

Also, your 1kcc injectors have to be maxed out, be careful with higher ethanol content than 71%.

 

I would switch to a 6psi spring so you don’t get any part throttle issues. Going from a 11psi spring to a 6psi spring will not effect how much boost it’ll handle.

 

I didn’t even realize that earlier. OP get some 1300cc’s in there for the safety of some headroom. What fuel pump are you using?

 

walbro 450lph (E85 High-Pressure)

 

should be awesome street setup