yes they are 42 offset, an trust me dude u dont want it anyother way because they jus barely fit inside my wheel well in the back so i dnt rub if u go out any more ull rub in the rear well if u go in ur gunna rub on the inside i can crank my wheel all the way an not rub but im real friggin close JUST BEWARE OF CURBIN EM THAT TIRE IS REAL CLOSE TO THE GROUND ,i accidentally scratched mine the second day i had em in a pothole but it was vry minor,an taking curves is a dream NO TIRE FLEX hope this helps thx for da post

 

Have you had any problems with rubbing while hitting sudden bumps or cornering hard!. I like to drive my car very much, if i where to spend that kind of money on wheels and tires i just wanna be sure about the details. Can't have fun if your car is always tearing up tires or fender while doin the things you like to!

 

what's the make of those rims?

 

Ok for the first question im like u an i like cornering hard an i live on a bumpy as drive way an i havent noticed a single rub because the tire is still inside the wheelwell so it cant rub as for the second question those are ADR rims

 

Thank You for the info. I should have wheels and tires in november. I will post pics when there on my Thunder Grey Ralliart!.

 

Nice Rally-Art man, you should come to raleigh today man, we got a meet today at the Carolina Ale house today at 5pm

got like 12-20 ppl showing up today so you should come out!

 

looks good

 

Hi all

NICE RIDE like the graphics and nice wheels, was just wondering since you are running 215 35 18's if i ran 215 40 17's and droped the front end just above the tire to get rid of that gap if those would rub on front or back drop back 1/2 inch and front 3/4 the ofset on my wheels im wanting is +42 but wheel is also 7.0 not 7.5 any comments or helpfull hints on this thanks

 

^ no you will no rub....

 

Umm can you get snow tires on 18s.... just kidding!

Looking good!

 

Update
I had the front lowered with teins an i had a slight camber issue so i had to get a camber kit.(I was rubbing on the inside on the front) Im at about 70k miles now an i think my stock shocks are starting to go out because i hear rubbing now when i turn in the front. Backs are still fine to my knowlege.
Hope this helps guys
Couple of pics b4 the lowering

 

What brand od wheels are they ? They look good

 

They are ADRs i cant rem which kind. Ive nev seen any wheel like em. They are powdercoated white an the inside of the spokes are silver with a silver lip. Ive already been offered what i paid for em but i dont want to let go.....