that was me...i keep the evo as dirty as possible.

 

nice

 

We should make a list of "who has what color Evo". Would be pretty sick to roll with a gang of yellow evos hahahaa

 

Yellow evos sus and are ugly hahahahaha

 

Hatin' a** Evostacio

 

**********

 

Mann that was a call out. I guess since everyone is jumping on the roast session shall I begin...all this coming from a tuner who again had two 9 hit wonders, or the tuner that can only tune evos cause other vehicles maps are garbage bro..haha not to include the ignition maps are all over the place with no plateau. Or is it the -8 an fittings that you had welded on your radiator after someone told you "no no dont do that" and caused you to break that jms spec motor. And I dont think magnus would of like to know that that there 2.2 rotating setup is now the jms 2.2 Oh this is gonna get better. Only if people really knew about the janky a** port work or the poor quality of the motor builds. How can you port on a head and each port looks like you ported in the dark and go too deep and think the customer would find out. It doesnt take a rocket scientist to buld a 7 bolt motor it just needs to be done right. Now when you spin a bearing you should be sure eveything is cleaned up right because if not you will just keep spinning them. I remember I heard you were saying im just the tuner not the engine builder but honestly you suck at life and need to be put down.lol I know people plenty of the people you have messed over mostly army guys and is that how you conduct things at your shop cause you are the owner right? Or when something happens you just turn it all on your partner. So now about all the other stuff about being a legit shop, you should not state your shop as one. I know of plenty other shops that have there ducks in a row. Some shop is the only shop in town with a awd dyno something you could of had but screwing over customers wont get you one of those bra. So let me get this right STREET TUNING cars make you a legit shop. Isnt that shop you talking about home of 2 fast civic's "max ramos and mr lopez". A true one stop shop not a flake bake one. You know who I am I talk to you on the phone and I told you to close your mouth about me, and like a little b*t** you said naw I never said anything. Seems like you can type your fingers off but when you are comfronted all I heard was uh duh duh..and studders. Do yourself the favor stop cause ill be the vet and put you down.

 

Jorge Jorge, My Ralliart wasn't email flashed. It was a street tune done by Chris@AMS IN SA TOWN. The Tune wasn't locked either.

I was impressed with the results, So I wanted to set up another session with him when I got more parts. So to do so, I had to set up a "Group" tune so he could have a legitimate excuse to come from his shop and tune cars.

I made a thread in HERE, on EVOM about it. Asking people if they needed tunes, Chris may be able to come down if we had enough people.

What post do I get?...hahahaha.
I recall 4 people saying "stick with JMS" "JMS is the best..blah blah"

Then I recall clearly you saying.."Gilbert, I'm shocked you don't have faith in us, I thought you were a good guy....blah blah".

Of course after I didn't let you run evo scan for the OBRA you had to tune next day(your first RA). First impressions are everything Jorge, especially for the consumers. It seemed to me, you were out to make a quick buck. Hence I haven't been back since.

Just because I am in SaTown does it make me legally bonded to JMS?
Does my car's soul belong to you guys? Since you are the "premier" tuners of evos in the 210.

I'll keep my options open, and the best shop in my eyes gets my hard earned money.
JMS was considered, but def not high on the list. In all honestly, that's how everyone works!
Why go to Albertsons, when I got the fkn commissary!? haha

So yeah, that thread got deleted, because someone got butt -hurt. I dunno who.

Now your saying your shocked at the courage as I show as an AIRMAN? Over a car? Is that a slap in the face to the people that defend this country? Is it Jorge? Because you just made yourself look even more worthless.

Good luck with your shop Jorge and hate all you want that I take my money else where.

good day

 

Oh by the way, my buddy had an STI he wanted you to tune, He called you personally and you told him you dont tune STIs. SO there goes that out the window lmao.

Another Airman too.

 

This is funny. Time to waste my lunch on this bull****. You may not reply to this, but we all know damn well youll either read it or one of your minions will tell you what has been said.

First off, I didnt steal crap from your shop. Dont blame me for Joaquins lack of responsibility, and "respect". Knowing the way hes always been, I wouldnt doubt if those parts missing went to other customers cars that were missing them, or sold to someone else to make a quick buck. Since thats what he does. You moved shops and blamed me for missing parts? Funny. I didnt need any of your extra parts to piece together cars I had at my so called "garage". I spoke to you about this already, and shouldnt have to repeat myself. I did plenty at that shop to a 1g eclipse I was working on, and didnt even ask you for the labor I put into it. Again, like I told you, because I didnt care about the money. I was doing what I enjoyed doing which was working on DSMs. Money wasnt a big concern for me when I was working with you guys at JMS.

Need an example? Take my friend Jeremys car for example...which, by the way isnt running due to a failed motor build by JMS' "master mechanic" and motor is now apart again fixing his mistakes. His car left the shop missing numerous parts...why? Because another customers car needed parts...so hey, why not pull from his car and not say anything about it?

The way he was treated and Joaquins attitude towards customers was ultimately the reason I left. NOT because you guys didnt want me there. His negativity towards customers cars, Evos, DSMs, whatever it may be was not tolerable for how I do things. Guilty by association is how I see it, and I did NOT want to be part of a business who conducted work in such a manner.

Joaquin does half *** work, and blames others to not make him look like the bad person. Example for you Jorge. Mamba had been rebuilt by Joaquin...you drive it for a day or two, drives fine but has tons of blowby. You ask Joaquin about it, his obvious reaction to him self is to not make it seem like it was something he did because you would be on his *** about it. SO he blamed the blowby on a "bad turbo" (which does not cause blowby). I told you Jorge, its not the turbo thats bad, your motor is causing the blowby, in which you ignored. Im sure once you get it going again, WITH the new turbo..the blowby will still be there.

This part is especially funny coming from a place where they recommend AEM for any car that drives up to the shop, whether it be a bone stock car, to a mildly modded car.

Speaking of continuosly popping motors, last I recall...Joaquin did quite a number of rebuilds on his motor within the few years hes had it. I was there at the shop for a few months, and he did it twice, and countless other times that I recall BEFORE the shop was opened. "Thats what happens when you push 30lbs bro". If you build it right, itll handle what you throw at it. Not to mention a few other motors he built that also took a ****. Alfredos Evo was one, Rockmans was another, Jeremys GSX, The Machine, the built 7 bolt...and im sure im missing a few others. And this was what I witnessed in the 2 months or so that I was there... You can probably add Steves gear lubed half assembled motor on there, cause it would have went bye bye also.

I can also mention a certain White Evo that Joaquin "worked" on that noone knows about that had a "little" mishap on the way to the track..but I feel thatll be too much of a low blow to mention on here since NOONE knows about it.

 

Hey, I was just responding to someone's request for ANYONE ELSE THAT POSTED UP HAVING A BAD EXPERIENCE WITH JMS. Every company has dissatisfied customers eventually. I just thought it was ridiculous for someone to think otherwise, so I spent 4 seconds searching for a not so favorable JMS post. I think you know that I've never talked **** about you guys, made anything up, etc. I just call it like I see it. I will tell you this though. Your response to this post was WAAAAYYYY better than your response to that Patrick kid's post.

 

Dammmm yah still going at it in here. Imma go to the fort hood section now lol

 

PB Evo X GSR with the plate "Phantom" (not sure of the spelling) at the Warhawk gym on Lackland? I own the PB X SE and EB IX you may see up there.

 

^^^^^^^^^That sounds like Steve

 

First of all u are a idiot, u haven't learned a single thing from your past experiences have u, i don't see why u have to mention shop's names, David, Robert,mike, chad and me haven't even mentioned your shops name. i don't know what u call slander, but u need to look it up in the dictionary cause u my friend have been talking allot of s*** about NORIBILT since i took my car to u! U know what i was loyal to YOUR shop, when people would talk s*** i would back your sorry a** up every time. U know i was friends with all the guys at Noribilt years before i meet u, and i was really considering taking the build to them, but they didn't have the room cause they have so many builds going on, they respect the customers by storing all cars inside the shop, that's how a real shop takes care of customers cars, and when u guys had car's broken into, did u guys have insurance, "NO"! Don't u think u have the responsibility to at least have insurance covering your business and vehicles? Instead u rob parts off another car to fix all the mistakes u make, why would i have been missing, HEAD STUDS, FUEL PUMPS, AEM AIR/FUEL GAUGES, U STILL HAVE MY BUSHUR EXHAUST, WHICH U SAID U WERE GOING TO TRADE ME FOR A 3.5 EXTREME TURBO EXHAUST, WHAT HAPPENED THERE? how could some of these things be missing if i had them all in one box, bro u guys took them out, did the MAMBA ghost take them no, u guys used them without my permission! U always act like u are the one getting screwed over, and everyone is lying, if this business was ran straight, there wouldn't be any talk, only competition s*** talking! Till this day your business partner has never called me, be a man and let your ***** drop, if u make a mistake contact customer and tell them u screwed up, don't try and cover it and not tell me! totally disrespected me and u want to cry about me stating the facts! U take everything to heart, how many time was both 9's car at Noribilt"ALOT" Noribilt has tried to help your ignorant a** so many times, but u just cant pull the tampon out and give recognition! i feel bad for all the other customer u guys took advantage of and gave nothing in return! BY THE WAYS SHUT YOUR BIG F***** MOUTH ABOUT AIRMEN i was one once Dumbas*! What have u done for your country, but take advantage of! I all ready told u how we are going to solve this problem and i will fall through with that, u ask why i have to go that route, well we both know why! Wow u sent 1 trans which i compensated u for and one transfer case, in which i took good care of u with that! Course u are supposed to do what the customer ask, that the only thing u managed to get right and i had to give u s*** just to ship them which took weeks! U cry that i said a few things about your owner/partner, well u did allot of talking about him to, when something went wrong u blamed him, like u don't work there and your just a tuner, so i guess u don't build motor, service cars, ect, ect! i have seen u working on tons of cars, why put all the blame on him, Booth of u guys talk bad about each other, another thing, don't ask me for 600 dollars for the machine chop , when its some guys working out of his house with no real machine's, i paid labor months before u ever touch my car, my vehicle set outside in 2 feet tall grass for 7 months, dude wtf I'm still making payment on it, that's not showing respect or pride for your business! Till this day u say you guys have the first 2 evo that ran 9's in Texas, and like i said before that's a lie, the same guys that called u out in H-town ran better times with the same motors they how in the cars now! u guys change motor like underwear, and u think that my 4500 dollars 2.2L stoker assembly was going to last with Axel grease and metal shavings in the block, and i paid 600 dollars for that, u didn't even have the motor done when i showed up with the guys to get it, u had all ready lied to me and told me it was done, sad when 2 sets of bearing went bad with installation on the motor, anyone can see the material was sanded down till the bearing fit right, i called magnus and they told my u had no clue what u are doing, and noway bearing had to be sanded, u change the material construction after u burned the bearing up sanding them!man I'm tired hard a hard day work and to come home and see more Lie's posted up by u makes me want to laugh! U stated that u didn't know who there person was that started this who EVOM s*** talking, well i looked at the guys account and he works @ YOUR COMPANY, go figure!