Camp Lejeune/Jacksonville Evos
I got an email back from Cosworth too. They said if the pin on the end of the camshaft sticks out at least 3-4 mm it would be good to install. I measured, and it barely measures 2.5mm. I gotta say it again..but E VOL IX saved me from blowing up my engine. Unfortunately, someone had to find out the hard way...but i'm grateful. Thanks!...
I'm shipping the cam back to cosie. They're gonna replace the cam all together.
I'm shipping the cam back to cosie. They're gonna replace the cam all together.
Jason, I'm ordering the ETS fmic/short route piping. Once that gets here, with the new intake cam I'll be hitting the FAIL crew up. I want this Shiz installed already, I'm sick of looking at it!!...
btw...I don't know if you seen my earlier post...but my running rich fiasco was caused by the stock injectors. The scaling for some reason was changed from stock. We put it back to the stock settings, and it's running smooth now...weird.
btw...I don't know if you seen my earlier post...but my running rich fiasco was caused by the stock injectors. The scaling for some reason was changed from stock. We put it back to the stock settings, and it's running smooth now...weird.
Evolved Member
iTrader: (37)
Joined: Sep 2003
Posts: 3,146
Likes: 2
From: Spec-Ops Motorsports, Fayetteville, NC
Jason, I'm ordering the ETS fmic/short route piping. Once that gets here, with the new intake cam I'll be hitting the FAIL crew up. I want this Shiz installed already, I'm sick of looking at it!!...
btw...I don't know if you seen my earlier post...but my running rich fiasco was caused by the stock injectors. The scaling for some reason was changed from stock. We put it back to the stock settings, and it's running smooth now...weird.
btw...I don't know if you seen my earlier post...but my running rich fiasco was caused by the stock injectors. The scaling for some reason was changed from stock. We put it back to the stock settings, and it's running smooth now...weird.
well the hobby shop closes at 5 and they are super friggin busy. Doesnt look like I will beable to get to it till tomorrow since I dont have a jack or stands or anything.
YAYA for me.....hey Bob, you wanna make a trip to Cary for some hockey tonite?
YAYA for me.....hey Bob, you wanna make a trip to Cary for some hockey tonite?
Evolved Member
iTrader: (16)
Joined: Jan 2007
Posts: 691
Likes: 0
From: Fayetteville, NC via Puerto Rico
Jason, I'm ordering the ETS fmic/short route piping. Once that gets here, with the new intake cam I'll be hitting the FAIL crew up. I want this Shiz installed already, I'm sick of looking at it!!...
btw...I don't know if you seen my earlier post...but my running rich fiasco was caused by the stock injectors. The scaling for some reason was changed from stock. We put it back to the stock settings, and it's running smooth now...weird.
btw...I don't know if you seen my earlier post...but my running rich fiasco was caused by the stock injectors. The scaling for some reason was changed from stock. We put it back to the stock settings, and it's running smooth now...weird.
Don't hesitate to hit us up if you need something...I don't have the biggest garage in the world, but I do have a jack and jackstands if the hobby shop is packed....plus you can get off the god for saken base. Let us know what's up...It's probably just some nuts that need re-torqued..
yeah I went up there and they were again packed with a line for a lift, so no luck today....
Apparently it takes a woman over an hour to change spark plugs and an air filter, and she needs a lift to do so....wow..?
AND I got shafted out of a bad a$$ pair of skates on ebay...im pissed right now
Apparently it takes a woman over an hour to change spark plugs and an air filter, and she needs a lift to do so....wow..?
AND I got shafted out of a bad a$$ pair of skates on ebay...im pissed right now