I am willing to do $50 for 3 dyno pulls, it really shouldn't be higher than that even if we have only 10 cars on the dyno.

 

Dyno Day at Taylors Imports in Mooresville on Saturday, October 18th, 2008

Read the first post of this thread for more details.

Attendees:

(1) dsm25psi (dyno)
(2) tribe (dyno)
(3) sleeper (dyno)
(4) Evoz (dyno)
(5) GrkBallaG (dyno)
(6) mx4life85
(7) vigilante.zen (dyno?)
(8) Stop&TurnFreak (dyno?)
(9) steadly2004 (maybe)
(10)
(11)
(12)
(13)
(14)
(15)

Anyone else?

 

A Shell gas station at UNCC, 49 and john kirk has premium available (where the ABC liquor store is). They had some since yesterday and apparently still pumping premium. Also, the Exxon at the same intersection has some too. But every other gas station in a 5 mile radius doesn't have any, whats the dealio? Anyways, I'm sorry if this is irrelevant ladies and gents

 

Thanks alot for the heads up... In Rock Hill its getting harder and harder to get premium... Thanks for the tip!

 

gas going down nice, e85 3.15 hells yea

 

my friend is coming with me to the dyno he will be tuning his car on there so put his add him to the list. Tuan red evo

 

I know the mustang dyno reads lower than a dynojet. Who has dynoed on this dyno and what did you pull?

 

There was some controversy on this dyno...

 

Tuan's the man

 

Like what, people not liking what numbers they were putting down?

BTW still hoping to go, but have to find a babysitter still....

 

What was the controversy? Numbers too high or low?

 

I made 440 on this dyno and went 7.30at 98.5mph at mooreseville's 8th mile track, which should be close to 11.50's in the 1/4. Dsmfan95 made 380 on the stock turbo and went 7.80at91 at the same track! The numbers are a little high I think but these mustang dyno's are the best to tune on! Ptevo03 made 591 and had shifting problems and went 7.7 at 100 blowing the tires off thru 1st gear and a 1.9 sixtyfoot at the same track!

 

i might do the dyno depending if i have the money

 

Sup man, Im the guy you were talking to at autozone. Good to see you on the thread now, hope to see you at the dyno meet so you can meet everyone etc etc

 

ok, I need help, does anybody have an extra bold that goes into the head for the oil line, I just got my kit and guess what the bonjo bolt is not there. Let me know asap i need it like yesterday.
Thanks