Knoxville, TN Evo club.
Thread Starter
Newbie
Joined: Dec 2008
Posts: 86
Likes: 1
From: Knoxville, TN
My fav would be #2 with the evo in SEEVO to be red.
Next, I like #1 but with red color instead of orange.
Then #5 but, again, with red instead.
Its a close race to me though, and I do like the orange. Orange and black look great, but I'm thinking of doing a few red accents anyway so that would match. And we all have red brakes anyway.
Next, I like #1 but with red color instead of orange.
Then #5 but, again, with red instead.
Its a close race to me though, and I do like the orange. Orange and black look great, but I'm thinking of doing a few red accents anyway so that would match. And we all have red brakes anyway.
I'm thinking, I'm thinking.. I'm thinking................ I'm still thinking..
That FIC1450cc injectors are trashy. I think it was __pg that has them and is having a hard time dialing them in correctly. I FINALLY got them dialed in and now my car won't start, due to a fuel problem...
I started my car up fine in the morning. Worked 10 hours. Went to leave to go home and car wouldnt start. So first thing I knew it was fuel. It'll turn over but no pop. Since I've done this before and its worked, I went to the fuel rail (AMS), which has a plug bolt in it (for pressure gauges I'm assuming). Removed the plug and tried starting, after a couple turns it fired up. Yes I know fuel is spraying everywhere, but at this point it had been stuck at the parking lot for 2 days so I was desperate. With fuel flying out the rail. I put the plug back in and it stalled. This could be due to my FPR going out? Or my injectors... I have FPR that will be here monday, but today Im gonna try putting in my RC1200's back in and see if it cures it or not. If not then I know its the FPR. I also rented a fuel pressure gauge from AutoZone... $160! WTF... I know you get your money back when you return it but damn.
Hey __pg if you want to take a screeny of your Injector Scaling, Injector Latency, MAF Scaling and MAF Compensation. I can compare them to what I got and see if mine might help you a little bit. My email is damon_g@rocketmail.com
That FIC1450cc injectors are trashy. I think it was __pg that has them and is having a hard time dialing them in correctly. I FINALLY got them dialed in and now my car won't start, due to a fuel problem...
I started my car up fine in the morning. Worked 10 hours. Went to leave to go home and car wouldnt start. So first thing I knew it was fuel. It'll turn over but no pop. Since I've done this before and its worked, I went to the fuel rail (AMS), which has a plug bolt in it (for pressure gauges I'm assuming). Removed the plug and tried starting, after a couple turns it fired up. Yes I know fuel is spraying everywhere, but at this point it had been stuck at the parking lot for 2 days so I was desperate. With fuel flying out the rail. I put the plug back in and it stalled. This could be due to my FPR going out? Or my injectors... I have FPR that will be here monday, but today Im gonna try putting in my RC1200's back in and see if it cures it or not. If not then I know its the FPR. I also rented a fuel pressure gauge from AutoZone... $160! WTF... I know you get your money back when you return it but damn.
Hey __pg if you want to take a screeny of your Injector Scaling, Injector Latency, MAF Scaling and MAF Compensation. I can compare them to what I got and see if mine might help you a little bit. My email is damon_g@rocketmail.com
Last edited by Anubis18; Apr 6, 2013 at 06:29 AM.
Thread Starter
Newbie
Joined: Dec 2008
Posts: 86
Likes: 1
From: Knoxville, TN
Updated first post with this info.
Spring dragon ride update!
When: This Saturday April 13 at 8am.
Where: meeting at the newer Walmart parking lot on 411 hwy in maryville.
We will head up there drive around, stop somewhere for pictures (probably a few places). Then at around 11 we will meet up with the EVO X group for more driving, picturing, and being awesome.
Post up if you are going to attend so we'll have an idea of how who is coming before we pull out of wallyworld.
Spring dragon ride update!
When: This Saturday April 13 at 8am.
Where: meeting at the newer Walmart parking lot on 411 hwy in maryville.
We will head up there drive around, stop somewhere for pictures (probably a few places). Then at around 11 we will meet up with the EVO X group for more driving, picturing, and being awesome.
Post up if you are going to attend so we'll have an idea of how who is coming before we pull out of wallyworld.
Newbie
Joined: Jul 2005
Posts: 98
Likes: 0
From: Knoxville TN
I'm thinking, I'm thinking.. I'm thinking................ I'm still thinking..
That FIC1450cc injectors are trashy. I think it was __pg that has them and is having a hard time dialing them in correctly. I FINALLY got them dialed in and now my car won't start, due to a fuel problem...
I started my car up fine in the morning. Worked 10 hours. Went to leave to go home and car wouldnt start. So first thing I knew it was fuel. It'll turn over but no pop. Since I've done this before and its worked, I went to the fuel rail (AMS), which has a plug bolt in it (for pressure gauges I'm assuming). Removed the plug and tried starting, after a couple turns it fired up. Yes I know fuel is spraying everywhere, but at this point it had been stuck at the parking lot for 2 days so I was desperate. With fuel flying out the rail. I put the plug back in and it stalled. This could be due to my FPR going out? Or my injectors... I have FPR that will be here monday, but today Im gonna try putting in my RC1200's back in and see if it cures it or not. If not then I know its the FPR. I also rented a fuel pressure gauge from AutoZone... $160! WTF... I know you get your money back when you return it but damn.
Hey __pg if you want to take a screeny of your Injector Scaling, Injector Latency, MAF Scaling and MAF Compensation. I can compare them to what I got and see if mine might help you a little bit. My email is damon_g@rocketmail.com
That FIC1450cc injectors are trashy. I think it was __pg that has them and is having a hard time dialing them in correctly. I FINALLY got them dialed in and now my car won't start, due to a fuel problem...
I started my car up fine in the morning. Worked 10 hours. Went to leave to go home and car wouldnt start. So first thing I knew it was fuel. It'll turn over but no pop. Since I've done this before and its worked, I went to the fuel rail (AMS), which has a plug bolt in it (for pressure gauges I'm assuming). Removed the plug and tried starting, after a couple turns it fired up. Yes I know fuel is spraying everywhere, but at this point it had been stuck at the parking lot for 2 days so I was desperate. With fuel flying out the rail. I put the plug back in and it stalled. This could be due to my FPR going out? Or my injectors... I have FPR that will be here monday, but today Im gonna try putting in my RC1200's back in and see if it cures it or not. If not then I know its the FPR. I also rented a fuel pressure gauge from AutoZone... $160! WTF... I know you get your money back when you return it but damn.
Hey __pg if you want to take a screeny of your Injector Scaling, Injector Latency, MAF Scaling and MAF Compensation. I can compare them to what I got and see if mine might help you a little bit. My email is damon_g@rocketmail.com
Dude come see me before the weekend, cause I leave for work, and I'll have them dialed in, in an hour..
I had a vacuum line to the EGR solenoid that fell off without my knowing, thus leading to the no fire cause it wasn't opening. In my defense it was pretty hidden under the strut brace behind everything haha
I had a vacuum line to the EGR solenoid that fell off without my knowing, thus leading to the no fire cause it wasn't opening. In my defense it was pretty hidden under the strut brace behind everything haha
Last edited by Anubis18; Apr 8, 2013 at 07:16 PM.
Newbie
Joined: Jul 2005
Posts: 98
Likes: 0
From: Knoxville TN
Dude come see me before the weekend, cause I leave for work, and I'll have them dialed in, in an hour..
I had a vacuum line to the EGR solenoid that fell off without my knowing, thus leading to the no fire cause it wasn't opening. In my defense it was pretty hidden under the strut brace behind everything haha
I had a vacuum line to the EGR solenoid that fell off without my knowing, thus leading to the no fire cause it wasn't opening. In my defense it was pretty hidden under the strut brace behind everything haha
Don't you love when you go the long way around to find the problems, seems to be a thing with these cars lol.
Newbie
Joined: Jul 2005
Posts: 98
Likes: 0
From: Knoxville TN
Updated first post with this info.
Spring dragon ride update!
When: This Saturday April 13 at 8am.
Where: meeting at the newer Walmart parking lot on 411 hwy in maryville.
We will head up there drive around, stop somewhere for pictures (probably a few places). Then at around 11 we will meet up with the EVO X group for more driving, picturing, and being awesome.
Post up if you are going to attend so we'll have an idea of how who is coming before we pull out of wallyworld.
Spring dragon ride update!
When: This Saturday April 13 at 8am.
Where: meeting at the newer Walmart parking lot on 411 hwy in maryville.
We will head up there drive around, stop somewhere for pictures (probably a few places). Then at around 11 we will meet up with the EVO X group for more driving, picturing, and being awesome.
Post up if you are going to attend so we'll have an idea of how who is coming before we pull out of wallyworld.
Still haven't heard from the the tuner, getting anxious. I might have a local tuner look at it before the weekend. Are you in Knoxville? Are you joining us this weekend?
Don't you love when you go the long way around to find the problems, seems to be a thing with these cars lol.
Don't you love when you go the long way around to find the problems, seems to be a thing with these cars lol.
Yes... It sucks... haha
Newbie
Joined: Jul 2005
Posts: 98
Likes: 0
From: Knoxville TN
Come on guys, no one is going? Really?
I know Anubis18, MRLancer, Twinky and Ramen are out. What about the rest of you??
Me, Zlayer and one other guy is it? It's going to be super nice and hella fun!
I know Anubis18, MRLancer, Twinky and Ramen are out. What about the rest of you??
Me, Zlayer and one other guy is it? It's going to be super nice and hella fun!
Thread Starter
Newbie
Joined: Dec 2008
Posts: 86
Likes: 1
From: Knoxville, TN
Twink (lance) said he's not going due to car issues. Doc said he might come but is having weird overboost issues. I'm doing all my routine maintenance today or tomorrow so ill be in tip top shape. Hope some more of you can show up.