JNZ Finishing - powdercoating and ceramic services
I can't commend Joe enough for his efforts in striving for perfection. Not only is his pricing awesome, he will do everything he can to make his customers happy. I would recommend him to anybody for their powder coating needs. 
For the quad riders out there. 2 frames for 2 separate projects at the shop.
Red Starlight over Bonded Chrome
Candy Blue over Bonded Chrome
The red frame is for a Banshee that we're coating pretty much every part that can be coated in either the red or black starlight, chrome, silver or wrinkle black. Should really be nice when its done w/ black plastics.
Red Starlight over Bonded Chrome
Candy Blue over Bonded Chrome
The red frame is for a Banshee that we're coating pretty much every part that can be coated in either the red or black starlight, chrome, silver or wrinkle black. Should really be nice when its done w/ black plastics.
New addition to the shop: Dedicated ceramic oven 
Been in the works for the last 2 weeks and now its 99% done, just waiting for the temp controller to arrive tomorrow. Josh and Justin deserve the credit for getting everything together so well. I know alot of you guys have been asking me about ceramic lately and I was holding off until this was done. Our regular powder coating oven didn't really get hot enough to fully cure the ceramic. This one should get to 750+ w/o much problem.
Been in the works for the last 2 weeks and now its 99% done, just waiting for the temp controller to arrive tomorrow. Josh and Justin deserve the credit for getting everything together so well. I know alot of you guys have been asking me about ceramic lately and I was holding off until this was done. Our regular powder coating oven didn't really get hot enough to fully cure the ceramic. This one should get to 750+ w/o much problem.
New addition to the shop: Dedicated ceramic oven
Been in the works for the last 2 weeks and now its 99% done, just waiting for the temp controller to arrive tomorrow. Josh and Justin deserve the credit for getting everything together so well. I know alot of you guys have been asking me about ceramic lately and I was holding off until this was done. Our regular powder coating oven didn't really get hot enough to fully cure the ceramic. This one should get to 750+ w/o much problem.
Been in the works for the last 2 weeks and now its 99% done, just waiting for the temp controller to arrive tomorrow. Josh and Justin deserve the credit for getting everything together so well. I know alot of you guys have been asking me about ceramic lately and I was holding off until this was done. Our regular powder coating oven didn't really get hot enough to fully cure the ceramic. This one should get to 750+ w/o much problem.
"Our regular powder coating oven didn't really get hot enough to fully cure the ceramic"
i think i was one of the first couple of ppl to get stuff ceramic coated its actually on your web page iam just worried cause iam about to finsh my build and iam worried about the "coating" peeling off if it wasent cured properlly? so i be worried or will it withstand the temps without flaking off??
[/B]
"Our regular powder coating oven didn't really get hot enough to fully cure the ceramic"
i think i was one of the first couple of ppl to get stuff ceramic coated its actually on your web page iam just worried cause iam about to finsh my build and iam worried about the "coating" peeling off if it wasent cured properlly? so i be worried or will it withstand the temps without flaking off??
"Our regular powder coating oven didn't really get hot enough to fully cure the ceramic"
i think i was one of the first couple of ppl to get stuff ceramic coated its actually on your web page iam just worried cause iam about to finsh my build and iam worried about the "coating" peeling off if it wasent cured properlly? so i be worried or will it withstand the temps without flaking off??
When you put it on the car, let it idle for awhile until it gets up to normal temp. The company recommends "letting the car idle for 15 mins or so then drive easy for another 15-20, no boost or high rpms". If you do that you should be fine.
Ya I remember doing your manifold way back When you put it on the car, let it idle for awhile until it gets up to normal temp. The company recommends "letting the car idle for 15 mins or so then drive easy for another 15-20, no boost or high rpms". If you do that you should be fine.
When you put it on the car, let it idle for awhile until it gets up to normal temp. The company recommends "letting the car idle for 15 mins or so then drive easy for another 15-20, no boost or high rpms". If you do that you should be fine.Ok I will do that, I have to do that anyway cause it's a brand new motor and turbo setup so all should be good!!! Will post pics in here when the build is complete, thanks again Jnz finishing
Wrinkle Black JMF custom surge tank and intake pipe
Neon Pink JNZ EVO X spark plug cover
Wrinkle Red
Neon Green w/ Wet Black letters and oil cap
Red Starlight
Vermillion Splash w/ Glass Clear (hard to tell but this color has ALOT of orange/copper pearl)
Bavarian Silver
Texture White
Mirror Red
Neon Pink JNZ EVO X spark plug cover
Wrinkle Red
Neon Green w/ Wet Black letters and oil cap
Red Starlight
Vermillion Splash w/ Glass Clear (hard to tell but this color has ALOT of orange/copper pearl)
Bavarian Silver
Texture White
Mirror Red
