Hey all, we're staring the New Year off with a fresh start and a new outlook.
We're back for the New Year with a new direction.
The demand for our products and services has skyrocketed and due to this a few changes needed to be made.
The New Year will be started with a FULL TIME customer service representative that will be here to assist you with anything you need. A new face for better service and a more personal, in depth solution to your vehicles needs.
With the new staff, that also allows us to devote more time to our customers needs online. There will be constant, daily updates to our threads with a much larger forum presence.
There will be a new web page presented very shortly with a few perks added so that our customers will receive the best service possible.
A constant online presence will result in a not only a better forum service but Facebook, Aim, Twitter and Daily Blog updates as well.
Everything that we are changing is for the better of our customers and for the services that we can provide.
New work hours
New Wholesale directives
New APM Racing Product Dealer opportunities
New company policies
Company Employment Opportunities
Product Instructions and Tech Support (via email, phone or AIM)
New Tuning and Services pricing as well as schedules
Full Service Capabilities
We'll be revising our APM Product line up as well as adding numerous NEW releases to the community to so keep an eye on the thread.
Our Newest product release is the EVO X pump carrier solution. A complete drop in solution that will safely mod your current carrier with out any extensive labor and allow you to run a Walbro 255lph fuel pump.
This unit is a complete CNC design to ensure the best fitment and the utmost highest quality. Each kit will include all the necessary items to install the pump.
This kit will include the following;
A listing of our current APM Racing product line is such...
APM Street Series COP Ignition System Evo8/9
APM Race Series COP/CDI Ignition System Evo 8/9
Both available with optional coated plate in variety of colors (special orders only, black or abrasive aluminum finish standard)
APM Race Series Plug & Play Fuel System
APM Race Series Plug and Play E85 Fuel System
APM Race Series (In Tank) Duel Pump Setup
*Core replacement available upon request
APM Tubular Manifold Turbo Kit (either T3 Frame or T4 Frame available)
Turbo Options
Comp Turbo
Garrett
Precision Turbo & Engine
All turbo chargers are available with custom specs upon order
APM OE Look Cast Manifold Turbo Kit
Turbo Options
FP
HKS
APM Special
APM Race Series Aluminum Evo X Connecting Rods
APM Race Series Evo X Pistons
APM Race Series CNC 4G63 "BIG VALVE" Cylinder Head (Proven over the competition to make more power and out flow)
APM Race Series CNC 4G63 "PURE TRACK" Cylinder Head (Best cylinder head on the market for road race and street use)
APM Race Series Drive Shaft
Full Aluminum 2 Piece Unit
(Replaces entire unit for 2 piece aluminum unit with all new hardware)
APM Race Series Shortblocks available. 2.0-2.1-2.3-2.4 available
APM Power Stages
3 Stages Available per model
Stages will vary depending on your necessary power output or vehicle.
APM Drag Trans
APM Custom Rear Differential Setups
Auto X, Track and Drag available
Give us a call or shoot us a message about how we can further assist you with your car today!!!
We're back for the New Year with a new direction.
The demand for our products and services has skyrocketed and due to this a few changes needed to be made.
The New Year will be started with a FULL TIME customer service representative that will be here to assist you with anything you need. A new face for better service and a more personal, in depth solution to your vehicles needs.
With the new staff, that also allows us to devote more time to our customers needs online. There will be constant, daily updates to our threads with a much larger forum presence.
There will be a new web page presented very shortly with a few perks added so that our customers will receive the best service possible.
A constant online presence will result in a not only a better forum service but Facebook, Aim, Twitter and Daily Blog updates as well.
Everything that we are changing is for the better of our customers and for the services that we can provide.
New work hours
- M-F 10-6
- Closed Saturday and Sunday
New Wholesale directives
New APM Racing Product Dealer opportunities
New company policies
Company Employment Opportunities
Product Instructions and Tech Support (via email, phone or AIM)
New Tuning and Services pricing as well as schedules
Full Service Capabilities
- Custom Fabrication
- Steel, Aluminum, Chro-moly, CNC
- Intake and Exhaust Manifolds
- Exhaust Systems
- Intercooler and Intake Systems
- Cage Fabrication
- Custom Suspension Servicing
- Coilver Set-up
- Corner Balancing
- Alignment
- Transmission and T-Case Servicing
- General Maintenance
- Race Preparation
We'll be revising our APM Product line up as well as adding numerous NEW releases to the community to so keep an eye on the thread.
Our Newest product release is the EVO X pump carrier solution. A complete drop in solution that will safely mod your current carrier with out any extensive labor and allow you to run a Walbro 255lph fuel pump.
This unit is a complete CNC design to ensure the best fitment and the utmost highest quality. Each kit will include all the necessary items to install the pump.
This kit will include the following;
- APM Racing CNC Fuel Pump Housing
- Walbro 255lph Fuel Pump
- Fuel Filter
- Pre-cut Fuel Hoses
- 2 Stainless Steel Worm Clamps
A listing of our current APM Racing product line is such...
APM Street Series COP Ignition System Evo8/9
APM Race Series COP/CDI Ignition System Evo 8/9
Both available with optional coated plate in variety of colors (special orders only, black or abrasive aluminum finish standard)
APM Race Series Plug & Play Fuel System
APM Race Series Plug and Play E85 Fuel System
APM Race Series (In Tank) Duel Pump Setup
*Core replacement available upon request
APM Tubular Manifold Turbo Kit (either T3 Frame or T4 Frame available)
Turbo Options
Comp Turbo
Garrett
Precision Turbo & Engine
All turbo chargers are available with custom specs upon order
APM OE Look Cast Manifold Turbo Kit
Turbo Options
FP
HKS
APM Special
APM Race Series Aluminum Evo X Connecting Rods
APM Race Series Evo X Pistons
APM Race Series CNC 4G63 "BIG VALVE" Cylinder Head (Proven over the competition to make more power and out flow)
APM Race Series CNC 4G63 "PURE TRACK" Cylinder Head (Best cylinder head on the market for road race and street use)
APM Race Series Drive Shaft
Full Aluminum 2 Piece Unit
(Replaces entire unit for 2 piece aluminum unit with all new hardware)
APM Race Series Shortblocks available. 2.0-2.1-2.3-2.4 available
APM Power Stages
3 Stages Available per model
Stages will vary depending on your necessary power output or vehicle.
APM Drag Trans
APM Custom Rear Differential Setups
Auto X, Track and Drag available
Give us a call or shoot us a message about how we can further assist you with your car today!!!
Evolved Member
Driveshaft looks good, install pics? Price? Weight?
Weren't you guys working on the tubular subframes?
Weren't you guys working on the tubular subframes?
Evolving Member
Awesome to see this is happening. I have my block over here being done right now. Great guys to deal with glad to see they're going places!
Quote:
+1Originally Posted by 06mrevo
driveshaft looks good, install pics? Price? Weight?
Evolved Member
Have you changed your web site? I clicked on the link and it said the domain name had expired.
Evolving Member
Awesome Shop. Been there pretty frequently the last year or 2 and nothing but positive things to say!
Evolved Member
Interesting. I haven't heard from you guys since the change in ownership a few years back.
Quote:
Thankuthanku, we've always made sure that quality is first and when quality is first, parts look great!Originally Posted by evo ippo
bump for some good looking parts
Quote:
Weren't you guys working on the tubular subframes?
Install pics will be up the next post. Originally Posted by 06MREvo
Driveshaft looks good, install pics? Price? Weight?Weren't you guys working on the tubular subframes?
I'll see if I can source some install pics....the previous sales rep/marketing manager took minimal pics of products (that has now changed) so I'm doing what I can.
Price - 999.99 (no core required due to this unit being a completely new unit utilizing beefed up components (u-joints, m-10 bolts and nuts and a larger spline)
Weight - 27lbs (chromoly front, aluminum rear)
The subframes are not in production only due to our discretion.
Quote:
Thanks for the words Mike, it's deserving that Machiek gets some help up front. He's been swamped in the back for a while so I'm making things happen from now on. That kinda means I'll make him even more busy though Originally Posted by mc14
Awesome to see this is happening. I have my block over here being done right now. Great guys to deal with glad to see they're going places!
Quote:
Yep, btw how you been? Haven't seen you in a while, you have come by to see the remodeling. Originally Posted by spoolin d dub
WOW! Starting the New Year going H.A.M.!
Quote:
Thanks for the kind words bud, can't say we don't try. Originally Posted by GEVOVIII
great guys and great service..!
Quote:
We actually have a new web master and IT guy redoing everything, as soon as the new page comes up you guys will be the first to know. It'll be completely revised with a shopping cart and a few new features that'll make life easier for our customers. We're also creating an update page with our customers project as well as what happens behind the scenes here at APM so keep an eye out for us this year....you'll like what you see. Originally Posted by CoachG
Have you changed your web site? I clicked on the link and it said the domain name had expired.
Quote:
Thanks man, quality and service always prevail. Originally Posted by Kapoosh1
Awesome Shop. Been there pretty frequently the last year or 2 and nothing but positive things to say!
Quote:
Huh, don't know what you mean....it's been the same owner from the time it opened....and if your talking about the previous gentleman that was up here, he had nothing to do with the proprietorship of the company. Originally Posted by smp3000
Interesting. I haven't heard from you guys since the change in ownership a few years back.
Oh, sent you a pm on that other forum.
Quote:
Weren't you guys working on the tubular subframes?
Originally Posted by 06MREvo
Driveshaft looks good, install pics? Price? Weight?Weren't you guys working on the tubular subframes?
Quote:
Originally Posted by wizzo 8
+1
Here are the pics!!!
Quote:
Thanks Creamo, hows the car thus far?Originally Posted by Creamo3
Good Luck in 2011 Guys
BTW...Nice signature
Evolved Member
welcome back. so are you still going to make a K member for the evo? and if not how come.