!New Product! Force-Fed Performance CNC Race Head
Thread Starter
Former Sponsor
iTrader: (46)
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
Thank you. CNC work does make product cost go up quite a bit especially on a cylinder head where a ton of R&D has to be done to ensure that jackets arent cut which is very hard to do on the Evo heads since the casting on these are very poor and differ greatly from each other. We are trying to make a some what affordable CNC head for the community and hope that we can eventually get these moving so much that the price can be brought down from the retail its at now. Due to these being recently introduced tho the group buy pricing does make it the cheapest most advanced CNC head on the market.
Thread Starter
Former Sponsor
iTrader: (46)
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
****Update*****
These CNC products have been constantly changing over time. Now these heads offer even more flow with STD size valves and we have now added a larger valve option for those looking for Maximum power.
In addition a ceramic coating option is also available with combustion chamber coating as well as exhaust port coating.
Tobz performance has also been using these heads on a couple of his higher powered builds which will have results posted on here when he gets done.
Every single setup that has changed to a Force-Fed head has seen great increase in all around power, torque and spool
We are currently offering these heads at a introductory price lower than any other CNC cylinder head on the market.
These CNC products have been constantly changing over time. Now these heads offer even more flow with STD size valves and we have now added a larger valve option for those looking for Maximum power.
In addition a ceramic coating option is also available with combustion chamber coating as well as exhaust port coating.
Tobz performance has also been using these heads on a couple of his higher powered builds which will have results posted on here when he gets done.
Every single setup that has changed to a Force-Fed head has seen great increase in all around power, torque and spool
We are currently offering these heads at a introductory price lower than any other CNC cylinder head on the market.
Thread Starter
Former Sponsor
iTrader: (46)
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
http://www.youtube.com/watch?v=IgP7v...el_video_title
Tobz performance evo previously owned by Sharkbite sporting the new CNC FFP head
Tobz performance evo previously owned by Sharkbite sporting the new CNC FFP head
Thread Starter
Former Sponsor
iTrader: (46)
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
too the top. The CNC program has been furthur designed to increase flow by 10-15cfm. PM us for holiday pricing on the best cylinder head on the market