Notices
Vishnu Performance - California [Visit Site]

WHP goal

 
Thread Tools
 
Search this Thread
 
Old Nov 27, 2004 | 10:45 AM
  #1  
DDDEVO's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Sep 2004
Posts: 123
Likes: 0
From: BTR
Talking WHP goal

Was just curious, with the following installed, what is everyone's best guess at WHP using 93 octane??

Vishnu stage 1 sig w/ 264/272 cams
Samco IC hose kit
UIP w/ Forge bov
KN drop in filter (ok to replace stock w/ vishnu stage 1??)
Walbro ???lph fuel pump

Shiv, just trying to recreate the Vishnu Evo 8 featured in SCC's evo orgy. Was guessing whp to be about 330-345, am I close??? Thanks!!!!
Old Nov 27, 2004 | 02:27 PM
  #2  
Jaylenospoolboy's Avatar
Evolved Member
 
Joined: Jan 2004
Posts: 613
Likes: 0
From: Burbank
You might want to define the dyno standard. There are many manufacturers and the same car reads very differently on many of them.

The debate always starts here.

So based purely on your question, I'm sure you can find a dyno that will give you that reading.

On Vishnu's dyno w/ the above might be 260 to 275 whp w/ cat iirc. As a benchmark, stock evo's range from 190 to 215 whp.
Old Nov 27, 2004 | 03:01 PM
  #3  
Dyno4mance's Avatar
Evolved Member
iTrader: (5)
 
Joined: Dec 2003
Posts: 1,378
Likes: 0
From: NW Georgia
Originally Posted by Jaylenospoolboy
You might want to define the dyno standard. There are many manufacturers and the same car reads very differently on many of them.

The debate always starts here.

So based purely on your question, I'm sure you can find a dyno that will give you that reading.

On Vishnu's dyno w/ the above might be 260 to 275 whp w/ cat iirc. As a benchmark, stock evo's range from 190 to 215 whp.
On Vishnu's dyno with mods listed you will see 295-300 whp on 93 octane with test pipe and around 10whp less with high flow

Last edited by Dyno4mance; Nov 27, 2004 at 03:04 PM.
 




All times are GMT -7. The time now is 12:59 PM.