Stage 0 Mail In DD Dyno Results 91 Octane
No... I wish it were...this is the black one I did with no Xedeflash...although my peak #'s are more this car on the road felt much more linear due to the long and flat torque curve again not as high as some but the boost used was the limiting factor in this case
Evolved Member
iTrader: (20)
Joined: Mar 2003
Posts: 4,941
Likes: 0
From: Danville/Blackhawk, California
Originally Posted by revolagoy
Hey, guys this is my first post and I have some questions regarding my set-up.
I have an 03 Evo with a Vishnu Stage 0 Mail-in. (xflash and cat-back on 91 Octane) With the colder weather this time of year in AZ I have been getting higher boost levels (22-23psi) on my Defi D boost gauge, so I decided to get the car dynoed at a local shop here in AZ. Here are my questions:
1.) Is this boost level of 22 psi confirmed by the dyno too high?
2.) Are these HP (242) and TQ (246) good numbers for a mail-in xflash stage 0? It seems the torque is much higher than the sample graph on the Vishnu website for a Stage 0.
3.) Do the A/F ratios look ok?
Thanks for any feedback! I am very pleased with the car and Vishnu!
I have an 03 Evo with a Vishnu Stage 0 Mail-in. (xflash and cat-back on 91 Octane) With the colder weather this time of year in AZ I have been getting higher boost levels (22-23psi) on my Defi D boost gauge, so I decided to get the car dynoed at a local shop here in AZ. Here are my questions:
1.) Is this boost level of 22 psi confirmed by the dyno too high?
2.) Are these HP (242) and TQ (246) good numbers for a mail-in xflash stage 0? It seems the torque is much higher than the sample graph on the Vishnu website for a Stage 0.
3.) Do the A/F ratios look ok?
Thanks for any feedback! I am very pleased with the car and Vishnu!
Did the dyno operator say what stock evos put to the ground?Shiv
Thread Starter
Evolving Member
Joined: Apr 2004
Posts: 122
Likes: 0
Thanks for all the encouraging comments! The car feels great and pulls strong.
Shiv,
I just talked to the owner of Dyno-comp here in Scottsdale AZ and he said that they have dynoed stock evos at about 190 to the wheels. He also said the numbers on my car were corrected for atmospheric conditions. Shiv, is this torque of 246 on 91 octane above average or normal? It seems in comparison to the graph on your website for a Stage 0 to be higher. I am not complaining, I'm pretty excited about it!
I can't wait to move up to a stage 1! I'll have to come to San Fan to get a custom tune. Thanks again Shiv for selling a excellent product!!
Shiv,
I just talked to the owner of Dyno-comp here in Scottsdale AZ and he said that they have dynoed stock evos at about 190 to the wheels. He also said the numbers on my car were corrected for atmospheric conditions. Shiv, is this torque of 246 on 91 octane above average or normal? It seems in comparison to the graph on your website for a Stage 0 to be higher. I am not complaining, I'm pretty excited about it!
I can't wait to move up to a stage 1! I'll have to come to San Fan to get a custom tune. Thanks again Shiv for selling a excellent product!!