Notices
Vishnu Performance - California [Visit Site]

Alcohol/Meth Injection for STi (need help picking a system)

 
Thread Tools
 
Search this Thread
 
Old Aug 24, 2005 | 09:27 AM
  #1  
rich728's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 141
Likes: 0
From: Miami, FL
Alcohol/Meth Injection for STi (need help picking a system)

Race gas is getting expensive. I’m looking for an alternative way of running some more timing and boost, so I’m considering an Alcohol/Meth injection system. Here are a couple of systems I’ve found. Kindly chime in with some suggestions or alternatives. I’d like to get this installed so, so I can get it tuned next month.

SMC Subaru Kit

Aquamist Universal Kit

Boost Cooler Universal Kit


I would like to run the system using the XEDE of course.
Old Aug 25, 2005 | 10:28 AM
  #2  
rich728's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 141
Likes: 0
From: Miami, FL
I kinda need some one from Vishnu to let me know which to get. Shiv's going to have to tune it.

Thanks!!!
Old Aug 25, 2005 | 11:03 AM
  #3  
Dustin@Vishnu's Avatar
Former Sponsor
iTrader: (1)
 
Joined: Jun 2004
Posts: 1,114
Likes: 0
From: Livermore, Ca
See if you can get these guys to make you a kit.

http://www.alkycontrol.com/
Old Aug 25, 2005 | 11:28 AM
  #4  
rich728's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 141
Likes: 0
From: Miami, FL
have u used them before?
Old Aug 25, 2005 | 02:38 PM
  #5  
Dustin@Vishnu's Avatar
Former Sponsor
iTrader: (1)
 
Joined: Jun 2004
Posts: 1,114
Likes: 0
From: Livermore, Ca
Yes sir.
Old Aug 29, 2005 | 11:42 AM
  #6  
rich728's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 141
Likes: 0
From: Miami, FL
Dustin,

I spoke to Julio. Their on board to make me a system. They want to know where their control unit will draw a signal from. MAP or MAF or do you want to have both available and have shiv give both a shot. Let me know soon. I'f not ill call you later today
Old Aug 29, 2005 | 12:11 PM
  #7  
Dustin@Vishnu's Avatar
Former Sponsor
iTrader: (1)
 
Joined: Jun 2004
Posts: 1,114
Likes: 0
From: Livermore, Ca
They just need a 0-5v input. I think on the EVO kits they do it for maf, so that would be the way to go. We will end up generating a 0-5v output with the xede anyways.
 




All times are GMT -7. The time now is 01:56 AM.