HELP PLEASE! - What about the Evo 6 TME RS2?
Thread Starter
Evolving Member
Joined: Aug 2003
Posts: 103
Likes: 0
From: Trinidad, W.I.
HELP PLEASE! - What about the Evo 6 TME RS2?
Shiv or Dustin, can you help? 
I just received the Xede SMART kit from Vishnu, but some advice needed please.
I e-mailed Chiptorque a while ago, but they referred me to you for help.
The Evo 6 TME Xede 'base' maps from ChipTorque's site are still not available.
What maps do I use? Are Evo 8 RS (US) maps suitable?
I also have a RalliArt Evo 6 GSR ECU (RA 420996R1.)
I was advised that pins "8" and "22" must be swapped first at harness socket to use it.
Is it suitable for use with the Xede?
Can you supply an Xede Flash of the Evo 6 RS2 ECU (JDM)?
... or of the RalliArt GSR ECU (JDM)?
... or should I buy an XFlash Tester module instead?
All comments and advice appreciated.
I just received the Xede SMART kit from Vishnu, but some advice needed please.
I e-mailed Chiptorque a while ago, but they referred me to you for help.
Specification:
Car: ......... Evo 6 TME RS2 (with an Evo 7 engine.)
Turbo: ..... TD05HRA-16G6-10.5T
Cams: ..... Tomei 'Poncams.'
Air-box: ... OEM Evo 6
Upgrades: ARP con-rod bolts + ARP head-studs.
Exhaust: .. OEM downpipe (to upgrade), 3" cat-back + "Test" pipe.
ECU: ........ OEM Evo 6 RS2 ECU.
Car: ......... Evo 6 TME RS2 (with an Evo 7 engine.)
Turbo: ..... TD05HRA-16G6-10.5T
Cams: ..... Tomei 'Poncams.'
Air-box: ... OEM Evo 6
Upgrades: ARP con-rod bolts + ARP head-studs.
Exhaust: .. OEM downpipe (to upgrade), 3" cat-back + "Test" pipe.
ECU: ........ OEM Evo 6 RS2 ECU.
What maps do I use? Are Evo 8 RS (US) maps suitable?
I also have a RalliArt Evo 6 GSR ECU (RA 420996R1.)
I was advised that pins "8" and "22" must be swapped first at harness socket to use it.
Is it suitable for use with the Xede?
Can you supply an Xede Flash of the Evo 6 RS2 ECU (JDM)?
... or of the RalliArt GSR ECU (JDM)?
... or should I buy an XFlash Tester module instead?
All comments and advice appreciated.
Last edited by nix; Apr 29, 2006 at 08:30 AM.
Thread Starter
Evolving Member
Joined: Aug 2003
Posts: 103
Likes: 0
From: Trinidad, W.I.
Originally Posted by Ludikraut
What octane gas are you running?
l8r)
l8r)
Rumoured (by refinary staff and tuners) to be anywhere from '91' to 93' RON.
To be on the safe side I'd start with '91' maps for street use.
I can always "trade up" after sorting out all the bugs first and then tuning.
BTW Ludikraut I'm getting an intermittent "back-fire" after hard acceleration and
quickly coming off the gas. Any ideas?... (*HKS SSQ BOV installed*)
Originally Posted by Noize
You should transport that car to the US and trade it for my Evo VIII! 
Don't you wish... 
Last edited by nix; May 1, 2006 at 03:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
smokedmustang
General Engine Management / Tuning Forum
8
Dec 5, 2006 05:30 PM
