Notices
Vishnu Performance - California [Visit Site]

Stage 1+ XFlash Dyno

 
Thread Tools
 
Search this Thread
 
Old Apr 16, 2004 | 07:13 PM
  #1  
dailod's Avatar
Thread Starter
Newbie
iTrader: (9)
 
Joined: Oct 2003
Posts: 28
Likes: 0
From: CA
Stage 1+ XFlash Dyno

Just got back from Vishnu to get a dynotuned XFlash for my car. Shiv told me to come and post my results so here they are. Mods I have are HKS Hi-Power, HKS Downpipe, UR 3" CAT, HKS 264/272 Cams, and HKS Cam Gears. Car runs great now and feels smooth all throughout the powerband. Thanks Shiv for the XFlash

By the way Shiv, I left the cam gear cover and screws and two bolts that hold the intake box down. If you could hold those for me until I come down sometime next week to get them, that would be great. Thanks!


Last edited by dailod; Apr 16, 2004 at 07:19 PM.
Old Apr 16, 2004 | 07:58 PM
  #2  
n00dle's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jun 2003
Posts: 788
Likes: 0
Nice smooth curve and if i'm reading that correctly..... you went from Works P2 to XFlash? So this is what the Xflash Challenge is eh...
Gotta A/F and Boost chart of before and after?

Last edited by n00dle; Apr 16, 2004 at 08:07 PM.
Old Apr 16, 2004 | 09:25 PM
  #3  
evotomig's Avatar
Evolving Member
 
Joined: Jan 2004
Posts: 335
Likes: 0
From: N Cali
Nice!!

91 map, I presume
Old Apr 16, 2004 | 10:12 PM
  #4  
dailod's Avatar
Thread Starter
Newbie
iTrader: (9)
 
Joined: Oct 2003
Posts: 28
Likes: 0
From: CA
Yup, running on 91 Octane.

Had the P2 Flash before the cams so needed the XFlash. Either way, the XFLash feels wayyyyyyy better. Car pulls and pulls. Shiv didn't give me any other charts so maybe he'll be able to post up the other data.
Old Apr 19, 2004 | 05:56 PM
  #5  
Aby@MIL.SPEC's Avatar
Former Sponsor
iTrader: (161)
 
Joined: Jun 2003
Posts: 3,043
Likes: 13
From: San Elijo Hills, Ca.
Nice power curve. I am glad to see these specific mods w/xflash.
Old Apr 22, 2004 | 03:40 PM
  #6  
dpardo's Avatar
Evolving Member
iTrader: (1)
 
Joined: Nov 2003
Posts: 259
Likes: 0
From: Los Angeles, CA
How is your idle with just the Xflash?

Is Shiv able to tune out the rough idle of the HKS cams with only an Xflash or is the Xede needed?
 




All times are GMT -7. The time now is 07:46 AM.