Sale On Perrin Products!!!!
Thread Starter
Former Sponsor
iTrader: (98)
Joined: Feb 2003
Posts: 4,260
Likes: 2
From: Gilbert, AZ
Sale On Perrin Products!!!!
All Products Listed On Sale!!! Please PM For Best Prices!!!!
Perrin 2 Piece Radiator Hose Kit EVO VIII
PERRIN Performance™ silicone radiator hose kits will add style and form to your engine bay.
Made of high gloss vividly colored silicone, PERRIN™ radiator hoses are an excellent compliment to your existing PERRIN intake system or inlet hose.
The PERRIN™ radiator hose kit will replace the upper and lower radiator hoses on your Lancer Evolution VIII.
PERRIN™ radiator hoses have a higher burst rating than stock hoses insuring failure won't result under higher pressures.
--------------------------------------------------------------------------------------------------
Perrin EVO VIII Crank Pulley
The PERRIN Performance™ lightened crank pulley for the Lancer Evolution is engineered to reduce rotating mass, increasing horsepower and torque.
Made from 6061T6 aluminum, the PERRIN™ pulley is considerably lighter then the stock crank pulley. The PERRIN pulley is not under driven. The pulley is a redesigned, 4-pound lighter rendering of the stock crank pulley.
Aftermarket under drive pulleys are prone to charging and drivability problems from being overly under driven. The PERRIN Performance™ lightened crank pulley will have no effect on your cars charging system. The PERRIN Performance™ pulley will not wear out engine bearings or the oil pump, and will not add any additional vibration or noise.
--------------------------------------------------------------------------------------------------
Perrin Silicon Upper IC Pipe Kit EVO VIII
The PERRIN Performance™ EVO boost tube is a direct replacement for the upper boost tube spanning from the throttle body to the cold side of the turbocharger. Adds performance and horsepower by increasing air flow to the motor. The PERRIN Performance™ upper boost tube maintains a constant inside diameter and ultra smooth interior surface. The PERRIN™ upper boost tube will work with all factory replacement blow off valves.
Available in 3 bold colors RED-BLUE-BLACK
You do not need to purchase a smaller battery or a relocation kit to use the PERRIN™ boost tube.
--------------------------------------------------------------------------------------------------
Perrin EVO VIII Short Ram Intake
The PERRIN Performance™ Evolution intake is a complete intake system replacing every stock component to the turbocharger.
The PERRIN™ intake kit includes a power coated cold rolled steel heat shield to prevent heat soak. A smooth silicone intake pipe reaches all the way to the turbo charger increasing the inside diameter of the intake tube and providing a smooth air path.
A PERRIN™ high flow filter maximizes horsepower and torque while providing reliable air filtration to protect the life of the motor.
--------------------------------------------------------------------------------------------------
Perrin E.B.C.S
Make your stock ECU work like an expensive aftermarket boost controller.
The PERRIN™ EBCS replaces the factory, bleed type, boost control solenoid offering an extremely fast reaction time for accurate boost control.
The EBCS is a huge benefit for consumers with aftermarket ECU's that use the factory solenoid for boost control. EcuTek, Hydra, UTEC, Motec, AEM, Haltech, Unichip (custom programming needs to be done for the EBCS).
Add the EBCS to any aftermarket ECU to provide full electronic boost control without the need to purchase a separate AVC-R or similar external boost controller.
The actuator is operated by a direct acting single solenoid. No boost pressure is pressing on the actuator, therefore no premature boost loss can occur. The EBCS allows a much lower waste gate duty cycle to produce higher boost levels giving tuners more headroom when modifying high horsepower vehicles.
A built in, non locking, manual override allows tuners to physically test the boost controller. The EBCS will work as a replacement solenoid for all popular Electronic boost controllers.
Designed to handle up to 120psi, the EBCS features aluminum and glass reinforce nylon construction including 425degree (temp) fittings and vacuum hoses for high heat resistance.
Perrin 2 Piece Radiator Hose Kit EVO VIII
PERRIN Performance™ silicone radiator hose kits will add style and form to your engine bay.
Made of high gloss vividly colored silicone, PERRIN™ radiator hoses are an excellent compliment to your existing PERRIN intake system or inlet hose.
The PERRIN™ radiator hose kit will replace the upper and lower radiator hoses on your Lancer Evolution VIII.
PERRIN™ radiator hoses have a higher burst rating than stock hoses insuring failure won't result under higher pressures.
--------------------------------------------------------------------------------------------------
Perrin EVO VIII Crank Pulley
The PERRIN Performance™ lightened crank pulley for the Lancer Evolution is engineered to reduce rotating mass, increasing horsepower and torque.
Made from 6061T6 aluminum, the PERRIN™ pulley is considerably lighter then the stock crank pulley. The PERRIN pulley is not under driven. The pulley is a redesigned, 4-pound lighter rendering of the stock crank pulley.
Aftermarket under drive pulleys are prone to charging and drivability problems from being overly under driven. The PERRIN Performance™ lightened crank pulley will have no effect on your cars charging system. The PERRIN Performance™ pulley will not wear out engine bearings or the oil pump, and will not add any additional vibration or noise.
--------------------------------------------------------------------------------------------------
Perrin Silicon Upper IC Pipe Kit EVO VIII
The PERRIN Performance™ EVO boost tube is a direct replacement for the upper boost tube spanning from the throttle body to the cold side of the turbocharger. Adds performance and horsepower by increasing air flow to the motor. The PERRIN Performance™ upper boost tube maintains a constant inside diameter and ultra smooth interior surface. The PERRIN™ upper boost tube will work with all factory replacement blow off valves.
Available in 3 bold colors RED-BLUE-BLACK
You do not need to purchase a smaller battery or a relocation kit to use the PERRIN™ boost tube.
--------------------------------------------------------------------------------------------------
Perrin EVO VIII Short Ram Intake
The PERRIN Performance™ Evolution intake is a complete intake system replacing every stock component to the turbocharger.
The PERRIN™ intake kit includes a power coated cold rolled steel heat shield to prevent heat soak. A smooth silicone intake pipe reaches all the way to the turbo charger increasing the inside diameter of the intake tube and providing a smooth air path.
A PERRIN™ high flow filter maximizes horsepower and torque while providing reliable air filtration to protect the life of the motor.
--------------------------------------------------------------------------------------------------
Perrin E.B.C.S
Make your stock ECU work like an expensive aftermarket boost controller.
The PERRIN™ EBCS replaces the factory, bleed type, boost control solenoid offering an extremely fast reaction time for accurate boost control.
The EBCS is a huge benefit for consumers with aftermarket ECU's that use the factory solenoid for boost control. EcuTek, Hydra, UTEC, Motec, AEM, Haltech, Unichip (custom programming needs to be done for the EBCS).
Add the EBCS to any aftermarket ECU to provide full electronic boost control without the need to purchase a separate AVC-R or similar external boost controller.
The actuator is operated by a direct acting single solenoid. No boost pressure is pressing on the actuator, therefore no premature boost loss can occur. The EBCS allows a much lower waste gate duty cycle to produce higher boost levels giving tuners more headroom when modifying high horsepower vehicles.
A built in, non locking, manual override allows tuners to physically test the boost controller. The EBCS will work as a replacement solenoid for all popular Electronic boost controllers.
Designed to handle up to 120psi, the EBCS features aluminum and glass reinforce nylon construction including 425degree (temp) fittings and vacuum hoses for high heat resistance.
