Hey guys after this past weekend with Abner and all the installs I was re-inspired and updated my system with new location, hose and two 0.4 mm nozzels instead of one 0.8 mm.

I run a 80/20 water to meth mix. It feels like its now better distriputed and have since leaned it out more (Mistu log posted up to 5th gear) I will go dyno this weekend. last time I did 348 whp and 318 tq mustang dyno...

Im hoping with the new mivec map I made and leaner afrs + more mods i will make 360+. I will continue to lean it out to about 12.0 Afr's due to the high amount of water... boost is about 27 psi

Blackberry camera is all I have.






Got to have a wideband!!!




Aquamist is the best water/meth kits out there and the customer service is topnotch!!! That HSV has gone threw hell and then some and still works great!!!

MODS;
Agency power turbo back
ported stock exhaust manifold
Apexi intake
hard pipe kit
Nisei Lower IC
Hallman boost controler (27 psi)
Aquamist 2d with a priming pump from windshield tank, x2 0.4 nozzels
Buschur ceramic o2 housing
Ecuflash street tuned by me
Forge rs bov
tein s techs
Thanks to Abner and Richard for the help!!!