HFS-Install, Beautiful !!!
 

I figured i share how the install went and what we got out of the set up.

Here is what i got on the car for "power upgrades"

works 3 inch dp
works 3 inch catback w/gutted muffler
works HFC
works air filter
griffin stage2 intercooler (beautiful)
aquamist HFS-5 WI using 50/50 water meth, trigerred by IDC%
tuned by Franz Diebold on dyno dynamics

Note: the WI HPgraph is actually around 267HP on power so I am not sure why the print-out says 258HP Max which is the green curve before WI. Not bad for an 8 with no cams, on the most conservative reading dyno out there.

http://www.pltek.net/graph.jpg


http://www.pltek.net/nozzle.jpg


http://www.pltek.net/tankpump.jpg


http://www.pltek.net/dss3.jpg


http://www.pltek.net/HFVflowsensor.jpg

very nice! {thumbup}

very stealth...xcept for the flow sensor/HSV :p

+1

nice set up. i am also in NH. where did you get the car tuned? where can i buy that meth kit?

Guessing it was done at KTR if he's from NH and Franz tuned it :)

Best place to get tuned is Dent Sport Garage in Norwood Ma. I will be getting my HFS-5 kit installed and tuned there in a few weeks.{thumbup} http://www.dentsport.com/

yeah,

we thought of installing both inside the car to keep them from heat and moisture but ultimately decided to put them in the engine compartment.

i know that we could have placed the pump next to the tank pointing down, etc to make it pretty but what the heck :lol:

Can you link me to a place to purchase that tank?

https://www.evolutionm.net/forums/sh...1&postcount=14
https://www.evolutionm.net/forums/sh...0&postcount=15

How would this pump handle 100% meth?

Those dyno results are just with water, no meth correct?

he mentioned 50/50 at the beginning of the thread

oops, its getting late I guess haha sorry

----

He was responding to the question immediately above from 80210. Learn to read yourself and do a search. Your question has been answered many times over on the forum.