***Official NV Chat Thread***
Washed my car this afternoon.... started it up to put it back in the garage. It was cold and on an incline and i stalled it.... now it will crank all day long but won't start.
wtf... any ideas?
wtf... any ideas?
check to see if your clutch pedal switch is making full contact with the pedal when you push it all the way down. Sometimes the bracket the switch is mounted to gets bent. just re align it and try again. or simply disconnect the 2pin harness from the back of the switch. good luck
OK found it.... there are 2 fuses under the dash with the engine symbol on them.... turns out when it stalled it popped the 10amp fuse... put a new one in and it fired right up
Last edited by MarkS; Feb 13, 2013 at 05:26 PM.
check to see if your clutch pedal switch is making full contact with the pedal when you push it all the way down. Sometimes the bracket the switch is mounted to gets bent. just re align it and try again. or simply disconnect the 2pin harness from the back of the switch. good luck



