Notices
West Region Includes AZ, CA, HI, NV, UT.

2010 EVO X on the dyno at Vivid Racing

Thread Tools
 
Search this Thread
 
Old Apr 1, 2010 | 06:17 PM
  #1  
Vivid Racing's Avatar
Thread Starter
Former Sponsor
iTrader: (98)
 
Joined: Feb 2003
Posts: 4,260
Likes: 2
From: Gilbert, AZ
2010 EVO X on the dyno at Vivid Racing

We had a customer from Tucson bring in his 2010 Mitsubishi EVO X. We installed an Agency Power catback exhaust and did a VR ECU tune. The baseline numbers are with the Agency Power catback exhaust already installed. After the flash the 2010 Evo X made an astonishing 293hp to the wheels!

Here are the end results of the tune:

Baseline(w/Agency Power catback)-260hp 277ft/lbs
After Tune– 293hp 295ft/lbs

With the Vivid Racing Stage 1 Flash in action, the EVO X picked up a surprising +33 hp and +18 ft lbs of torque. The numbers only tell part of the story; the turbo spools about 1,000 RPM quicker and has more torque in the lower RPMs.




If you are in the southwest region, please bring us your EVO. We are always having sales and specials, just ask us. You may not know this but, because you are a member of this forum you get discounts on any products or services.

Feel free to contact me if you have any questions or need anything.

Thank you,
Jim
Reply
Old Apr 27, 2010 | 05:25 PM
  #2  
Vivid Racing's Avatar
Thread Starter
Former Sponsor
iTrader: (98)
 
Joined: Feb 2003
Posts: 4,260
Likes: 2
From: Gilbert, AZ
We did another round of modifications to this 2010 Evo X. The 4B11 is now breathing through an Agency Power intake and suction pipe. Once again the car hit our Mustang Dyno and was re-tuned for optimal performance. The 2010 Evo X put down 306whp and made 321ft/lbs of torque!






Thank you,
Jim
Reply
Old Apr 27, 2010 | 05:27 PM
  #3  
TwStDeVo's Avatar
Evolved Member
iTrader: (62)
 
Joined: Oct 2003
Posts: 1,672
Likes: 0
From: 5o5
nice numbers! btw, do u guys use corrected or uncorrected numbers?
Reply
Old Apr 27, 2010 | 06:00 PM
  #4  
Vivid Racing's Avatar
Thread Starter
Former Sponsor
iTrader: (98)
 
Joined: Feb 2003
Posts: 4,260
Likes: 2
From: Gilbert, AZ
Originally Posted by TwStDeVo
nice numbers! btw, do u guys use corrected or uncorrected numbers?
Thanks! The customer is really happy with the outcome.

To answer your question these are corrected numbers. We have a Mustang Dyno and these typically read low. We do make a small correction. It translates into a 3-5hp correction.

Thank you,
Jim
Reply




All times are GMT -7. The time now is 02:33 PM.