EvolutionM - Mitsubishi Lancer and Lancer Evolution Community
Share Your Pictures with Our Community. Upload Now
How it started
How it started
0 2026/05/10 11:08:46
this is the OEM port the stock O2 bung wire uses i recommend you split the oem plug to use or make your own frame metal will cut my thumb got sliced open pushing that plastic bit out in this pic the aem sensor is already installed you'll notice it will have to go sensor threw the hole and leftover cable tuck away haaha legit like 3 to 4 feet of cable is really needed not the whole thing
this is the OEM port the stock O2 bung wire uses i recommend you split the oem plug to use or make your own frame metal will cut my thumb got sliced open pushing that plastic bit out in this pic the aem sensor is already installed you'll notice it will have to go sensor threw the hole and leftover cable tuck away haaha legit like 3 to 4 feet of cable is really needed not the whole thing
0 2026/05/09 20:01:54
Fold the carpet down mine was pre cut as if someone did this before
Fold the carpet down mine was pre cut as if someone did this before
0 2026/05/09 20:01:52
This is the trim covering the plug for the oem O2 plug that goes right under the car
This is the trim covering the plug for the oem O2 plug that goes right under the car
0 2026/05/09 20:01:49
I was in the far left in this picture and i hade to make sure like 5 different times
I was in the far left in this picture and i hade to make sure like 5 different times
0 2026/05/09 20:01:46
this was after i did a temp test fit on wire length so ignore the grey and white hahah
this was after i did a temp test fit on wire length so ignore the grey and white hahah
0 2026/05/09 20:01:44
0 2026/05/09 20:01:41
0 2026/05/09 20:01:39
0 2026/05/09 20:01:36
0 2026/05/09 20:01:34
0 2026/05/09 20:00:08
0 2026/05/09 20:00:05
Advertisement
0 2026/05/09 20:00:03
0 2026/05/09 20:00:01
0 2026/05/09 19:59:59
0 2026/05/09 19:59:56
0 2026/05/09 19:57:56
0 2026/05/09 19:57:53
0 2026/05/09 19:57:51
0 2026/05/09 19:57:48
0 2026/05/09 19:57:46
0 2026/05/09 19:57:44
0 2026/05/09 19:57:41
0 2026/05/09 19:57:39
0 2026/05/09 19:57:37
0 2026/05/09 19:13:25
0 2026/05/09 15:19:12
this is the assembled engine mount with the sleeve and the housing you can see how the filament is color changing the parts in yellow where I touched
this is the assembled engine mount with the sleeve and the housing you can see how the filament is color changing the parts in yellow where I touched
0 2026/05/08 20:46:35
here’s the engine mount installed where you can see the heat from the engine side of the mount turning it yellow whereas on the frame side it’s still orange
here’s the engine mount installed where you can see the heat from the engine side of the mount turning it yellow whereas on the frame side it’s still orange
0 2026/05/08 20:46:30
0 2026/05/07 13:10:23
0 2026/05/07 13:10:20
0 2026/05/07 13:10:17
Advertisement