speaker install using factory bracket

May 27, 2015

11

0

Finished product mounts right back in place in the door.

Finished product mounts right back in place in the door.

0 2015/05/27 09:47:33 wowagorill

Drill holes in the factory bracket.

Drill holes in the factory bracket.

0 2015/05/27 09:46:52 wowagorill

use the metal bracket pieces to hold the screws in place.

use the metal bracket pieces to hold the screws in place.

0 2015/05/27 09:45:49 wowagorill

Drop in the speaker and line up the screw holes with these hollow recesses. I was able to get all 4 screws in place.

Drop in the speaker and line up the screw holes with these hollow recesses. I was able to get all 4 screws in place.

0 2015/05/27 09:44:43 wowagorill

This is what you should be left with.

This is what you should be left with.

0 2015/05/27 09:44:04 wowagorill

I cut away the extra plastic with a sawsall blade by hand.

I cut away the extra plastic with a sawsall blade by hand.

0 2015/05/27 09:43:14 wowagorill

Next i needed to remove everything but the outer ring.

Next i needed to remove everything but the outer ring.

0 2015/05/27 09:42:22 wowagorill

Then using some clippers i cut away the magnet.

Then using some clippers i cut away the magnet.

0 2015/05/27 09:41:37 wowagorill

first i cut out the paper cone with an x-axto knife.

first i cut out the paper cone with an x-axto knife.

0 2015/05/27 09:40:25 wowagorill

i took out the factory speakers and decided to modify them to fit my new speakers.

i took out the factory speakers and decided to modify them to fit my new speakers.

0 2015/05/27 09:39:41 wowagorill

I bought these Alpine 6.5 speakers and of course they don't fit in the door.

I bought these Alpine 6.5 speakers and of course they don't fit in the door.

0 2015/05/27 09:38:35 wowagorill