EvolutionM - Mitsubishi Lancer and Lancer Evolution Community
0 2015/12/19 12:41:14
Here you can see the Grade 8 sleeve inside the urethane bushing.
Here you can see the Grade 8 sleeve inside the urethane bushing.
0 2015/12/19 12:41:17
The thickness of these bushings is confidence inspiring. This is why the noise level from these mounts is so little. Very daily driver friendly.
The thickness of these bushings is confidence inspiring. This is why the noise level from these mounts is so little. Very daily driver friendly.
0 2015/12/19 12:41:20
0 2015/12/19 12:41:22
Again, very well manufactured and even.
Again, very well manufactured and even.
0 2015/12/19 12:41:25
0 2015/12/19 12:41:28
What you get in the box from Buschur.
What you get in the box from Buschur.
0 2015/12/19 12:41:31
Mirror like finish, you can actually see my hands in the right mount.
Mirror like finish, you can actually see my hands in the right mount.
0 2015/12/19 12:41:33
Here you can really see the detail that goes into the CNC work. No cracks, inclusions, or runs.
Here you can really see the detail that goes into the CNC work. No cracks, inclusions, or runs.
0 2015/12/19 12:41:36
Again, another detail shot. Trying to get up close and personal with these.
Again, another detail shot. Trying to get up close and personal with these.
0 2015/12/19 12:41:39
0 2015/12/19 12:41:42
Grade 8 washers to place on your rear diff bolts before you slide them through the bushing sleeves.
Grade 8 washers to place on your rear diff bolts before you slide them through the bushing sleeves.
0 2015/12/19 12:41:45
0 2015/12/19 19:41:23
0 2015/12/19 19:41:37
What a difference! !
What a difference! !
0 2015/12/19 19:41:59
0 2015/12/19 19:42:23
0 2015/12/19 19:42:29
0 2015/12/19 19:42:35
0 2015/12/21 14:08:01
Top Side View
Top Side View
0 2016/01/14 18:03:13
Top Side View # 2
Top Side View # 2
0 2016/01/14 18:03:15
Close up of the sides where the factory mustache bar bolts would pass through.
Close up of the sides where the factory mustache bar bolts would pass through.
0 2016/01/14 18:03:19
These are solid bushings so I do expect some added noise once the car is moving.
These are solid bushings so I do expect some added noise once the car is moving.
0 2016/01/14 18:03:22
Smooth face. This side rests up against the rear diff.
Smooth face. This side rests up against the rear diff.
0 2016/01/14 18:03:25
Welded on both sides for maximum strength.
Welded on both sides for maximum strength.
0 2016/01/14 18:03:27
Close up of the main side support welds
Close up of the main side support welds
0 2016/01/14 18:03:31
Bottom Weld
Bottom Weld
0 2016/01/14 18:03:34
0 2016/01/14 18:03:37
Good close up of another main weld.
Good close up of another main weld.
0 2016/01/14 18:03:40
0 2016/01/14 18:03:43
From this angle you can see the thickness of the steel being used from the hole.
From this angle you can see the thickness of the steel being used from the hole.
0 2016/01/14 18:03:46
Steel follows through the entire length of the hole, not just at the flat face.
Steel follows through the entire length of the hole, not just at the flat face.
0 2016/01/14 18:03:49
0 2016/01/14 18:03:51
The powder coating is really nice on this bar!
The powder coating is really nice on this bar!
0 2016/01/14 18:03:55
0 2016/01/16 18:47:39
0 2016/01/16 18:47:40
0 2016/01/16 18:47:40
0 2016/01/16 18:47:41
0 2016/01/16 18:47:41
0 2016/01/16 18:47:42