EvolutionM - Mitsubishi Lancer and Lancer Evolution Community
0 2016/09/27 16:31:58
0 2016/09/28 14:10:06
Good
Good
0 2016/09/28 14:10:07
0 2016/09/28 14:10:08
0 2016/09/28 14:10:08
0 2016/09/28 18:04:44
0 2016/09/28 18:06:49
0 2016/10/01 14:11:38
0 2016/10/01 22:54:41
0 2016/10/17 15:32:10
0 2016/10/17 17:10:16
0 2016/10/17 17:14:46
Why? Because crack.
Why? Because crack.
0 2016/10/20 18:34:42
How? Use a cast manifold to prevent weld cracks.
How? Use a cast manifold to prevent weld cracks.
0 2016/10/20 18:35:35
Notice the silver extension ring that the abs rings are pressed on. These were not there before.
Notice the silver extension ring that the abs rings are pressed on. These were not there before.
0 2016/10/24 22:20:24
Driver side is the shorter axle. Same fix done on both sides
Driver side is the shorter axle. Same fix done on both sides
0 2016/10/24 22:20:45
Boostin Ported intake manifold just unboxed.
Boostin Ported intake manifold just unboxed.
0 2016/11/01 12:06:28
View of the inside of the manifold after each runner inlet has been cleaned up.
View of the inside of the manifold after each runner inlet has been cleaned up.
0 2016/11/01 12:06:29
Each runner ported deeply into the manifold.
Each runner ported deeply into the manifold.
0 2016/11/01 12:06:31
After installing EGR system components.
After installing EGR system components.
0 2016/11/01 12:06:33
+1mm Intake and +1mm exhaust valves. Cylinder bowls cleaned up.
+1mm Intake and +1mm exhaust valves. Cylinder bowls cleaned up.
0 2016/11/01 12:06:34
Intake side ported all the way to the valve bowls.
Intake side ported all the way to the valve bowls.
0 2016/11/01 12:06:36
Exhaust side needed new valve guides.
Exhaust side needed new valve guides.
0 2016/11/01 12:06:37
Inside the cylinder head intake side.
Inside the cylinder head intake side.
0 2016/11/01 12:06:39
Top view of cylinder head right after unboxing.
Top view of cylinder head right after unboxing.
0 2016/11/01 12:06:41
Supertech dual valve springs, new keepers.
Supertech dual valve springs, new keepers.
0 2016/11/01 12:06:42
Attempting to get a picture of the valve seals, but failing.
Attempting to get a picture of the valve seals, but failing.
0 2016/11/01 12:06:44
L19 head studs installed into block hand tight with molylube. Block mating surface thoroughly cleaned with brake cleaner and compressed air.
L19 head studs installed into block hand tight with molylube. Block mating surface thoroughly cleaned with brake cleaner and compressed air.
0 2016/11/01 12:06:45
OEM head gasket installed.
OEM head gasket installed.
0 2016/11/01 12:06:47
Kiggley HLA installed. Head installed onto block, Studs were torqued to 96ftlbs in the following increments. 35-65-96
Kiggley HLA installed. Head installed onto block, Studs were torqued to 96ftlbs in the following increments. 35-65-96
0 2016/11/01 12:06:48
Lifters and rocker arms installed with plenty of Amsoil Break in 30 weight to go around.
Lifters and rocker arms installed with plenty of Amsoil Break in 30 weight to go around.
0 2016/11/01 12:06:50
GSC R2 billet cams installed and torqued to spec. Assembly lube all over the cams. BE CAREFUL when lubing the cam. I cut my finger on the MIVEC veins. They are sharp!
GSC R2 billet cams installed and torqued to spec. Assembly lube all over the cams. BE CAREFUL when lubing the cam. I cut my finger on the MIVEC veins. They are sharp!
0 2016/11/01 12:06:52
Cam Gears installed and torqued to spec. FIC 2150cc injectors inserted into manifold with AMS fuel rail.
Cam Gears installed and torqued to spec. FIC 2150cc injectors inserted into manifold with AMS fuel rail.
0 2016/11/01 12:06:53
0 2016/11/01 12:06:55
0 2016/11/01 12:06:57
Perfect camshaft and crank timing + tension.
Perfect camshaft and crank timing + tension.
0 2016/11/01 12:06:58
FP exhaust manifold installed, Intake, and UICP. I had to remove the radiator to fit the manifold. Easiest way to do it without breaking things.
FP exhaust manifold installed, Intake, and UICP. I had to remove the radiator to fit the manifold. Easiest way to do it without breaking things.
0 2016/11/01 12:07:00
Spoolin up COP installed, CF accent pieces. Wire tuck in the future.
Spoolin up COP installed, CF accent pieces. Wire tuck in the future.
0 2016/11/01 12:07:02
Manifold smoking as the engine heats up for the first time.
Manifold smoking as the engine heats up for the first time.
0 2016/11/01 12:07:04
0 2016/11/07 11:44:37