EvolutionM - Mitsubishi Lancer and Lancer Evolution Community
0 2016/08/19 18:14:41
0 2016/08/19 18:15:51
Cusco 6 point roll cage, directly ordered from Cusco japan.
Cusco 6 point roll cage, directly ordered from Cusco japan.
0 2019/12/09 22:18:41
Removed rear drivers side door and back seats to begin Cusco cage install of the main hoop
Removed rear drivers side door and back seats to begin Cusco cage install of the main hoop
0 2019/12/09 22:20:55
0 2019/12/09 22:22:30
Dashboard removed to install front dashboard through cage
Dashboard removed to install front dashboard through cage
0 2019/12/09 22:24:49
Cusco cage installed and completed
Cusco cage installed and completed
0 2019/12/09 22:27:54
Cusco 6 point cage directly ordered from Japan
Cusco 6 point cage directly ordered from Japan
0 2019/12/09 22:51:18
This cage is one of just a few made because of the design. Most will stay away from it because of the install type and damage it can do. This is a dashboard through design which means you'll need to cut a hole in the dashboard so the cage can stay snug along the A pillars. A common bolt in cage typically bends around the dashboard leaving less leg room. This dashboard through is commonly found in custom fully welded cages. I just decided to keep it more JDM with this brand.
This cage is one of just a few made because of the design. Most will stay away from it because of the install type and damage it can do. This is a dashboard through design which means you'll need to cut a hole in the dashboard so the cage can stay snug along the A pillars. A common bolt in cage typically bends around the dashboard leaving less leg room. This dashboard through is commonly found in custom fully welded cages. I just decided to keep it more JDM with this brand.
0 2019/12/09 22:53:36
Rear door removed to install first main hoop from the kit. This will be the biggest piece behind the front seats hugging the B pillars
Rear door removed to install first main hoop from the kit. This will be the biggest piece behind the front seats hugging the B pillars
0 2019/12/09 23:01:42
Front and rear cage pieces bolted up to the main hoop of the B pillar. I decided to keep the shipping plastic on to help prevent scratches of the cage
Front and rear cage pieces bolted up to the main hoop of the B pillar. I decided to keep the shipping plastic on to help prevent scratches of the cage
0 2019/12/09 23:04:11
Cage is just about complete. Time to replace the bolts that came with the kit for some aftermarket titainium bits
Cage is just about complete. Time to replace the bolts that came with the kit for some aftermarket titainium bits
0 2019/12/09 23:06:21
Dashboard removal for front cage install
Dashboard removal for front cage install
0 2019/12/09 23:09:13
Over a dozen times of removing and installing both cage and dashboard just to get the dashboard cut snug close to the cage
Over a dozen times of removing and installing both cage and dashboard just to get the dashboard cut snug close to the cage
0 2019/12/09 23:10:28
Rear mounting fits snug between the Tommi Makinen Edition Recaros out back
Rear mounting fits snug between the Tommi Makinen Edition Recaros out back
0 2019/12/09 23:12:51
0 2019/12/09 23:14:52
0 2019/12/09 23:15:26
Here in Hawaii... 🤙🏼 Exterior conversion semi complete. Currently working on the AWD conversion
Here in Hawaii... 🤙🏼 Exterior conversion semi complete. Currently working on the AWD conversion
0 2021/04/21 00:30:39