EvolutionM - Mitsubishi Lancer and Lancer Evolution Community
0 2017/05/24 13:10:33
0 2017/05/24 13:11:43
0 2017/05/24 13:18:15
0 2017/07/05 17:52:50
0 2017/07/05 17:53:20
0 2017/07/17 14:32:00
0 2017/07/17 15:03:31
0 2017/07/19 15:27:29
No debris that would cause the bushing to sit higher than it's supposed to.
No debris that would cause the bushing to sit higher than it's supposed to.
0 2017/08/21 16:47:23
Bushing covers where hitch pin goes through, and inner hole looks too big allowing play in the cable movement
Bushing covers where hitch pin goes through, and inner hole looks too big allowing play in the cable movement
0 2017/08/21 16:47:36
Shifter bushing diameter is too big and doesn't allow cable to go over it. I'd have to press it in.
Shifter bushing diameter is too big and doesn't allow cable to go over it. I'd have to press it in.
0 2017/08/21 16:47:40
Shifter bushing doesn't fit inside cable.
Shifter bushing doesn't fit inside cable.
0 2017/08/21 16:47:45
0 2017/09/11 20:22:00
0 2017/09/11 20:24:07
base Tephra XML periphery tables
base Tephra XML periphery tables
0 2018/03/13 16:13:15
Phenem XML periphery tables
Phenem XML periphery tables
0 2018/03/13 16:13:15
base Tephra XML MUT table
base Tephra XML MUT table
0 2018/03/13 16:13:15
Phenem XML MUT table
Phenem XML MUT table
0 2018/03/13 16:13:15
0 2018/03/21 17:43:36
0 2018/03/21 17:43:37
0 2018/03/21 17:43:37
0 2020/06/02 20:57:40
0 2020/06/02 20:57:48
0 2020/06/02 20:57:58
Actuator
Actuator
0 2020/06/02 20:58:07
0 2020/06/02 20:58:17
0 2020/06/02 20:58:25
0 2020/06/02 20:58:35
0 2020/06/02 20:58:45
Cold side
Cold side
0 2020/06/02 20:58:53
Hot side fins
Hot side fins
0 2020/06/02 20:59:02
Hot side
Hot side
0 2020/06/02 20:59:10
0 2020/06/02 20:59:19
Oil line was pinched but i left on good copper gasket + bolts
Oil line was pinched but i left on good copper gasket + bolts
0 2020/06/02 20:59:27
Turbo Info
Turbo Info
0 2020/06/02 20:59:36
0 2021/05/20 12:54:45
0 2021/05/20 12:54:49
0 2021/05/20 12:54:53
0 2021/05/20 12:54:59
0 2021/05/20 12:55:08