EvolutionM - Mitsubishi Lancer and Lancer Evolution Community
0 2017/11/01 18:10:07
0 2018/09/15 18:41:38
0 2018/09/18 06:53:44
0 2020/08/27 03:49:33
0 2020/08/28 00:11:38
0 2020/08/28 00:12:33
0 2020/08/28 00:13:35
0 2020/08/28 00:17:11
0 2020/08/28 00:18:55
0 2020/10/30 18:30:54
0 2020/11/09 20:15:51
Two cable connections under the steering wheel
Two cable connections under the steering wheel
0 2021/01/30 15:02:04
0 2021/01/30 15:05:17
0 2021/01/30 15:10:06
0 2021/01/30 15:10:42
0 2021/01/30 15:27:49
0 2021/07/17 23:07:23
0 2021/07/17 23:07:26
Bumper off!
Bumper off!
0 2021/07/19 02:06:34
Remove the drivers side radiator fan and shroud
Remove the drivers side radiator fan and shroud
0 2021/07/19 02:08:15
Front bar off!
Front bar off!
0 2021/07/19 02:24:22
Remove the drivers side radiator fan and shroud
Remove the drivers side radiator fan and shroud
0 2021/07/19 02:24:42
Turbo and O2 housing out the bottom, then manifold off
Turbo and O2 housing out the bottom, then manifold off
0 2021/07/19 02:25:06
Tiny o2 housing on the stock turbo!
Tiny o2 housing on the stock turbo!
0 2021/07/19 02:26:00
New manifold gasket
New manifold gasket
0 2021/07/19 02:26:21
New mani, turbo and o2 put together with oil and water lines attached
New mani, turbo and o2 put together with oil and water lines attached
0 2021/07/19 02:26:36
Installed from the top - tight fit! radiator out would have been easier
Installed from the top - tight fit! radiator out would have been easier
0 2021/07/19 02:27:16
mocking up the stock IC hoses - IC pipe bracket near airbox interferes (ground it off) and auto box dipstick hits bottom IC pipe joiner
mocking up the stock IC hoses - IC pipe bracket near airbox interferes (ground it off) and auto box dipstick hits bottom IC pipe joiner
0 2021/07/19 02:27:51
Mockup of stock front mount. Doesnt fit without cutting half of the bumper support bar away or hanging out the bottom of the bumper. didnt want that so went to an aftermarket IC core
Mockup of stock front mount. Doesnt fit without cutting half of the bumper support bar away or hanging out the bottom of the bumper. didnt want that so went to an aftermarket IC core
0 2021/07/19 02:29:24
Aftermarket core mocked up - tucks up under bumber upport bracket. Keeps bumper bolt above middle of IC
Aftermarket core mocked up - tucks up under bumber upport bracket. Keeps bumper bolt above middle of IC
0 2021/07/19 02:30:28
0 2021/07/19 02:31:43
Stock IC pipe bracket mounts to frame pretty well - other side not so much
Stock IC pipe bracket mounts to frame pretty well - other side not so much
0 2021/07/19 02:32:03
had to cut this one and make a strap to join it to the frame
had to cut this one and make a strap to join it to the frame
0 2021/07/19 02:32:40
IC mounts from below. Keeps bumper mounts on bottom side
IC mounts from below. Keeps bumper mounts on bottom side
0 2021/07/19 02:33:06
Bracket mounted with a nutsert. The power steering lines were a pain. In the end i cut them and re-routed
Bracket mounted with a nutsert. The power steering lines were a pain. In the end i cut them and re-routed
0 2021/07/19 02:33:38
New manifold cover and cam valley cover. intake is a tight fit.
New manifold cover and cam valley cover. intake is a tight fit.
0 2021/07/19 02:35:18
Bumper needed some minor triming near the fog lights - but nothing you can see from the exterior. Importantly every bumper mount is retained.
Bumper needed some minor triming near the fog lights - but nothing you can see from the exterior. Importantly every bumper mount is retained.
0 2021/07/19 02:35:53
0 2021/07/19 02:59:56
650cc rated
650cc rated
0 2021/07/19 03:40:52
15 min cruise
15 min cruise
0 2021/07/19 03:41:19