Racer Xs Turbo Build
#143
Hahaha bakuro yeah I set mine down on a furniture dolly and rolled it out... Wasn't as easy as it sounds though cause after I undid the lift I noticed that two of the wheels are fixed so I had to lift and drag to get it out!
Found the balance shaft belt just stuffed in between the crankshaft and I think that's what cause this failure
Found the balance shaft belt just stuffed in between the crankshaft and I think that's what cause this failure
#145
I borrowed the bearing heater from work and decided to put the bearings on the LSD. first bearing went on like a glove I love this thing! I jumped the gun on the second bearing and it only went half way down haha so I'm taking it to work tomorrow to use the bearing press. I'm not sure if the speed gear is supposed to sit all the way down though because there is so much more surface area above it. Head gasket came in today, and engine will be here Monday just wanted to update you guys
#149
Got the transmission apart, and put the final drive gear on the LSD. Going to soak it in some mtl before putting it in, but I think I'm going to need to remove the outer race from the case because it moves around and I don't think its supposed to because its a pressed fit..
#150
Evolved Member
iTrader: (5)
Got the transmission apart, and put the final drive gear on the LSD. Going to soak it in some mtl before putting it in, but I think I'm going to need to remove the outer race from the case because it moves around and I don't think its supposed to because its a pressed fit..