Looking for more maps, 80700010 Def
#82
Evolved Member
Thread Starter
Join Date: Apr 2008
Location: Sydney, Australia
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Sub7, is that the stock ROM or a tuned one? Just on first look I can see a few things that look mislabelled. It is difficult for me to verify without the car to test it on but I will check it out over the next day or so and post up what I think would be a correct XML.
#83
Evolved Member
Thread Starter
Join Date: Apr 2008
Location: Sydney, Australia
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Check this out and do some testing. Alot of mislabelled maps. Check the boost limit maps because I am only 50-50 on whether the 2 new ones are correct. The old one I am pretty sure was wrong.
To test the Warmup Ignition map, try zero-ing the maps and see if the car feels better cold.
To test the Warmup Ignition map, try zero-ing the maps and see if the car feels better cold.
#84
Evolved Member
Thread Starter
Join Date: Apr 2008
Location: Sydney, Australia
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
This will also be the same. Most likely all Maps labelled as 1 and 2 will be for N,1,2 gear and 3,4,5 gear. But test this before trusting it. Boost maps 2 and 3 will be the same.
#85
Evolving Member
Cool, I'll give it a try. It's easy to spot if lo-timing is hi-timing (or vice-versa). It's a stock rom, un-tuned.
cossie, 90550001 won't work with auto-tranny..
cossie, 90550001 won't work with auto-tranny..
Last edited by sub7; Jul 30, 2008 at 08:51 PM.
#87
#90
Evolved Member
Thread Starter
Join Date: Apr 2008
Location: Sydney, Australia
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Got a few for you.
Add the Enrich scaling line from a few posts back.
<table name="Boost Desired Engine Load # 2" address="435c" level="4">
<table name="RPM" address="4d22"/>
</table>
<table name="Boost Desired Engine Load # 3" address="4372" level="4">
<table name="RPM" address="4d22"/>
</table>
<table name="Max Wastegate Duty # 2" address="431a" level="4">
<table name="RPM" address="5278"/>
</table>
<table name="Max Wastegate Duty # 3" address="4330" level="4">
<table name="RPM" address="5278"/>
</table>
<table name="Warmup Ignition Retard 1" address="3e6d" scaling="Enrich">
<table name="Load" address="503a"/>
<table name="Engine Speed" address="500a" elements="19"/>
</table>
Add the Enrich scaling line from a few posts back.
<table name="Boost Desired Engine Load # 2" address="435c" level="4">
<table name="RPM" address="4d22"/>
</table>
<table name="Boost Desired Engine Load # 3" address="4372" level="4">
<table name="RPM" address="4d22"/>
</table>
<table name="Max Wastegate Duty # 2" address="431a" level="4">
<table name="RPM" address="5278"/>
</table>
<table name="Max Wastegate Duty # 3" address="4330" level="4">
<table name="RPM" address="5278"/>
</table>
<table name="Warmup Ignition Retard 1" address="3e6d" scaling="Enrich">
<table name="Load" address="503a"/>
<table name="Engine Speed" address="500a" elements="19"/>
</table>