EvoX & Ralliart TC-SST Gear Information
#1
EvoX & Ralliart TC-SST Gear Information
I've been working on the tuning of the Ralliart and EvoX TC-SST and found some logging information. A lot of my logging involves long drives to test the warm up cycles, cool down cycles, gear temperatures and if slip is occurring. I'm in the process of building some new EvoScan Gauge templates.
I don't know if this is going to help anyone else but me but here is some fun information that I gathered.
It drives me crazy when trying to read logs and I can't tell what gear the vehicle is in except for using RPM/MPH to figure out gear ratio's when the TC-SST should be able to tell me. So we spent a few hours over some good beers to bring you these results. Hopefully it will help you.
In EvoScan the following items can be setup for logging
CAN 29-0 (Selector position/directly correlates to display)
3 = Normal
2 = Sport
1 = S-Sport
CAN 30-0 (Manual Mode Selector/slap shifter)
1 = Manual
0 = Automatic
CAN 31-0 (Gear Position Sensor)
80 = Park
82 = Reverse
78 = Neutral
129 = Automatic 1st
130 = Automatic 2nd
131 = Automatic 3rd
132 = Automatic 4th
133 = Automatic 5th
134 = Automatic 6th
49 = Manual Mode 1st
50 = Manual Mode 2nd
51 = Manual Mode 3rd
52 = Manual Mode 4th
53 = Manual Mode 5th
54 = Manual Mode 6th
I'll keep sorting information but this should help for those who are tuning SST's in the future. It helps to know what gear/mode you were in during logging.
There are many more but they still need testing to figure out the values required.
I don't know if this is going to help anyone else but me but here is some fun information that I gathered.
It drives me crazy when trying to read logs and I can't tell what gear the vehicle is in except for using RPM/MPH to figure out gear ratio's when the TC-SST should be able to tell me. So we spent a few hours over some good beers to bring you these results. Hopefully it will help you.
In EvoScan the following items can be setup for logging
CAN 29-0 (Selector position/directly correlates to display)
3 = Normal
2 = Sport
1 = S-Sport
CAN 30-0 (Manual Mode Selector/slap shifter)
1 = Manual
0 = Automatic
CAN 31-0 (Gear Position Sensor)
80 = Park
82 = Reverse
78 = Neutral
129 = Automatic 1st
130 = Automatic 2nd
131 = Automatic 3rd
132 = Automatic 4th
133 = Automatic 5th
134 = Automatic 6th
49 = Manual Mode 1st
50 = Manual Mode 2nd
51 = Manual Mode 3rd
52 = Manual Mode 4th
53 = Manual Mode 5th
54 = Manual Mode 6th
I'll keep sorting information but this should help for those who are tuning SST's in the future. It helps to know what gear/mode you were in during logging.
There are many more but they still need testing to figure out the values required.
Thread
Thread Starter
Forum
Replies
Last Post
richardjh
Mitsubishi TC-SST Discussion
10
Dec 22, 2010 06:45 PM
Fatalwishes
Mitsubishi TC-SST Discussion
4
Apr 20, 2010 11:32 AM