franzcars

I need the mut table too. I wasn't expecting you to only send me those.

As a general note for everyone, if I'm making a custom one-off patch, I need as many deffs as possible,

Hiram6g74

Tell me if you need to define you something else, and thanks in advance

Hiram6g74

Can you make it ?

Solarwater

Hi Franzcars, thanks for the patch, it is pretty cool!

I did find something that looks like it needs to be corrected. In the file for 55570006, it looks like the final table def is cut off. I finished the line using one of the other files as a template, and it seems to work fine.

Just thought I would bring it to your attention.

veszett

I wouldn't mind trying this patch on V3 53040310 if you can make it available.

franzcars

Thanks, I'll fix it and push it with the next update!

What's the original rom for your car? I see you're in the US but that's a EDM rom, if so the patch will not work unfortunately

franzcars

Big update, about 10 more patches in the first post

GP148

has anyone had any issues using Tephras launch maps feature with this upgrade. I am now trying to use both features together however, i am unable to have the launch maps engage. the timing and fuel targets are not changing when i try and launch. I have selected the max launch speed at 5km, not sure if i am missing somehing else

Hiboost

iTrader: (9)

Is this on an MR? If so you probably want to change your RPM to 4500 and test from there. On a GSR you would need to raise the normal stationary limiter to something like 6000 be able to hit the spark cut limiter 5500. At least that is the way I'm reading this from the 1st page:

“Recommended” settings:

• With the Fuel cut rev limiter set to the default 7599 and the Divider set to 1.11 the rev limiter will be just more than 7500

• On a 5MT car the stationary can be set to the default of 5500, however the stationary rev limiter under limits will need to be raised.

• On a SST car it needs to be set below the throttle closure RPM for the launch control, in testing we found 4500-4600 to be the most effective setting. On a stock 2.0 with a 5858 we built 3-5 psi depending on outside temperature, with no additional tuning.

GP148

Thanks for your reply , however, I was in referring to the launch maps within Tephra v3. I did initial tests for this patch and am aware of its ideal settings, however, I am unable to have both Tephras launch maps work at the same time as this patch being enabled. It is a MR and I would like to take advantage of the launch maps function within tephras build. Do you have any suggestions as to what I could be doing wrong

franzcars

Are they enabled by default now? I know for awhile he did not have them enabled by default on the MR's

trinibt65

Very interested in doing this but will it work on a 2010 ukdm fq300...ecu locked from factory by ecutek unfortunately...so is there anyway my tuner using ecutek can program this in?or can it be done using the instructions of the first post?

franzcars

Unfortunately this is only for EcuFlash as Ecutek does not let end users to change the code as is needed to do for this patch.

franzcars

The patch is finally making its rounds

sleandro

Hello!
I'm trying to find the instructions to patch my ROM, but haven't found it yet. My ROM ID is 58640002. It's a 2011 lancer Ralliart. Would you help me patch it? What do you need?

Thanks mate!