evo ix 6266 gen2 849whp
#16
Newbie
Thread Starter
Join Date: Jan 2016
Location: preveza
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
one photo from my Car.
monster sport bonnet
do luck carbon aero trunk (original)
varis side skirts carbon
front ralliart lip (original)
enkei rpf1 8x17 with toyo r1r 235/45/17
12468227_10208629256753186_981181787_n.jpg
monster sport bonnet
do luck carbon aero trunk (original)
varis side skirts carbon
front ralliart lip (original)
enkei rpf1 8x17 with toyo r1r 235/45/17
12468227_10208629256753186_981181787_n.jpg
#17
Evolved Member
iTrader: (38)
one photo from my car.
Monster sport bonnet
do luck carbon aero trunk (original)
varis side skirts carbon
front ralliart lip (original)
enkei rpf1 8x17 with toyo r1r 235/45/17
12468227_10208629256753186_981181787_n.jpg
Monster sport bonnet
do luck carbon aero trunk (original)
varis side skirts carbon
front ralliart lip (original)
enkei rpf1 8x17 with toyo r1r 235/45/17
12468227_10208629256753186_981181787_n.jpg
ωραίο αναζητούν φίλος αυτοκίνητο
#20
Evolved Member
There is no US numbers, newton meters is Nm, and lbs is lbs, worldwide. And since it is in nm then 796 Nm is 587 foot pound by 7K ish and 450 foot pound by 6K and rising. At 45+ psi on VP import on 6266 I expected torque to be higher.
In kgm, the above is 796nm=81,1kgm of engine torque.
Marios
Last edited by Evo8cy; Jan 2, 2016 at 07:42 PM. Reason: added comment
#22
Evolving Member
I happen to like Italians and Italian women in particular, spent a few moons there, seen a bit of Venice also, don't make me change my point of view lol.
Injectors are up to the job if supported by the right fuel pump setup. Remember this is on VP import, and as I said his numbers are flywheel ones, not wheel hp.
Marios
Injectors are up to the job if supported by the right fuel pump setup. Remember this is on VP import, and as I said his numbers are flywheel ones, not wheel hp.
Marios
VP import fuel does go a bit further but I dont see the point of using fly wheel hp. Its like softcore ****.
#25
Evolving Member
Join Date: Feb 2011
Location: athens
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
did i read correctly...?
you painted or you used vinyl to change the color?
btw did you sold your engines head?
also , vlasis performs ecu programming or he does only engine works?
just curious, all the previous setups you had where tuned by karaflas?
kali xronia na exeis.
Michael.
you painted or you used vinyl to change the color?
btw did you sold your engines head?
also , vlasis performs ecu programming or he does only engine works?
just curious, all the previous setups you had where tuned by karaflas?
kali xronia na exeis.
Michael.
#26
Newbie
Thread Starter
Join Date: Jan 2016
Location: preveza
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
did i read correctly...?
you painted or you used vinyl to change the color?
btw did you sold your engines head?
also , vlasis performs ecu programming or he does only engine works?
just curious, all the previous setups you had where tuned by karaflas?
kali xronia na exeis.
Michael.
you painted or you used vinyl to change the color?
btw did you sold your engines head?
also , vlasis performs ecu programming or he does only engine works?
just curious, all the previous setups you had where tuned by karaflas?
kali xronia na exeis.
Michael.
yes i still have the engine head.
Vlasis and Giannis (Vlasis brother) does the engine Works.
Yes all my previous setups is from Ace motorsport (karaflas/ Greg)
kali xronia kai se esena Micheal