Tomei Arms Turbo installed!!!
Feb 4, 2009, 03:57 PM
#1
Former Sponsor
Thread Starter
iTrader: (9)
Join Date: Aug 2007
Location: FL
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Tomei Arms Turbo installed!!!
Well the other day I was offered to test the New Tomei Arms Turbo by Marco@Billet Design Motorsports. I figured since Diirk had a great setup and a good car to test this thing on to compare it to his green we'd use his car. So today we headed up to Billet Design to try this bad boy out. We get there and the turbo looks great. Install was easy and Tomei provided all hardware and gaskets. We went to log it on the street and the car feels great. We started with pulling timing out and adding fuel before even getting on it and the car feels just as strong. So tommorow were going to dyno the car and post results.
The car baselined at 448 whp 431wtq@28psi so were gonna see what happens tomorrow.
Here are some pics to show the two turbos and the install.
Enjoy
The car baselined at 448 whp 431wtq@28psi so were gonna see what happens tomorrow.
Here are some pics to show the two turbos and the install.
Enjoy
Last edited by CWiLL; Feb 4, 2009 at 06:50 PM.
Feb 4, 2009, 04:02 PM
#2
Evolved Member
iTrader: (5)
Join Date: Feb 2005
Location: Phoenix
Posts: 1,545
Likes: 0
Received 0 Likes
on
0 Posts
Very cool. Bet this generates tons of hits. Cant wait to see the dyno results.
The artwork on that compressor housing has gotta be worth 5 hp at least..."The raised letters act as cooling fins to reduce intake air temp." (JK)
The artwork on that compressor housing has gotta be worth 5 hp at least..."The raised letters act as cooling fins to reduce intake air temp." (JK)
Feb 4, 2009, 04:18 PM
#6
Evolved Member
iTrader: (1)
Join Date: Dec 2005
Location: California
Posts: 1,218
Likes: 0
Received 0 Likes
on
0 Posts
So you're making 441whp and 431wtq, on the stock IX turbo? What kind of fuel are you running? Is it straight pump, or you're mixing it with meth, etc...????
