Best Exhaust ???
#1
Newbie
Thread Starter
Join Date: Jun 2006
Location: Belfast UK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Best Exhaust ???
Hi all,
Looking for a new exhaust for my Evo...Needs to be 3 inch + with no resonators (larger diameter the better) must not drop below 3 inch all the way through Preferably in titanium but stainless is ok..
Mines VX Pro II 90mm is at the top of my list so far but always open to suggestions....
Ideally i would like a 3.5 inch turbo back system that will bolt up to an AMS GT35R kit...
What does anyone recommend ?
Phil
Looking for a new exhaust for my Evo...Needs to be 3 inch + with no resonators (larger diameter the better) must not drop below 3 inch all the way through Preferably in titanium but stainless is ok..
Mines VX Pro II 90mm is at the top of my list so far but always open to suggestions....
Ideally i would like a 3.5 inch turbo back system that will bolt up to an AMS GT35R kit...
What does anyone recommend ?
Phil
Last edited by Phil_FQ; Mar 25, 2007 at 09:41 AM.
#4
Evolved Member
iTrader: (6)
If you want a 3" titanium turbo back exhaust.....good luck. As for a 3" stainless there are a ton out there. If you just type in "Exhaust" in search I bet 47,932 threads pop up. I am pretty sure this thread should be closed before it gets ugly. Every exhaust thread seems to get ugly lately.
Trending Topics
#9
Newbie
Thread Starter
Join Date: Jun 2006
Location: Belfast UK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Sorry lads close it if you want....
3 inch titanium exhausts are easy to get but i am looking for more than 3inch titanium and the only one i can find is the Mines VX Pro II which is 90mm....My question is it any good ? Seems to have the diameter on its side but has a fair few bends...Would i be better goign for the HPF Goliath 3.5inch system and its straighter but heavier ? or an APS 3.5 turbo back ?
I would like one from the turbo back (that will fit an AMS GT35R KIT)
Whats the largest diameter, straighest exhaust on the market today ????
3 inch titanium exhausts are easy to get but i am looking for more than 3inch titanium and the only one i can find is the Mines VX Pro II which is 90mm....My question is it any good ? Seems to have the diameter on its side but has a fair few bends...Would i be better goign for the HPF Goliath 3.5inch system and its straighter but heavier ? or an APS 3.5 turbo back ?
I would like one from the turbo back (that will fit an AMS GT35R KIT)
Whats the largest diameter, straighest exhaust on the market today ????
Last edited by Phil_FQ; Mar 25, 2007 at 09:36 AM.
#11
Newbie
Thread Starter
Join Date: Jun 2006
Location: Belfast UK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
So APS or HPF are looking like the two best ? Anyone have any idea if the turbo back systems from these two manufaturers will fit an AMS GT35R turbo kit ?
#12
here's a thread about the mines exhaust:
https://www.evolutionm.net/forums/sh...ighlight=mines
very beautiful exhaust
https://www.evolutionm.net/forums/sh...ighlight=mines
very beautiful exhaust
#14
Newbie
Thread Starter
Join Date: Jun 2006
Location: Belfast UK
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
The Mines system looks fantastic just worried about the amount of bends in it compared to say the HPF Goliath...
Does any one have any better/bigger pics of the Mines system ? Also are there any restrictions in it ?
The AMS stytem sounds fantastic but i already have a 3 inch system on the car just fancied something a bit more meaty...
Does any one have any better/bigger pics of the Mines system ? Also are there any restrictions in it ?
The AMS stytem sounds fantastic but i already have a 3 inch system on the car just fancied something a bit more meaty...