Hey peeps i have a question mabey someone can help me out. I have a lancer ralliart w/out the infinity sound package but i have a friend who i just sold one to that does have the infinity pkg. He has his own system and was going to give me the infinity head unit,amp,and 8" sub. do i need anything else or is the wiring the same in one that does not have the infinity pkg.

thanks,

ckcteekers

 

No the wirinng is not the same... I read on another post that all the speakers are powered off the infinty amp... I believe this is under the seat... should have one wire from the radio to the amp, and each speaker (7 total) out of the amp...so if I am correct you will essentially needto re-route all of your stereo wires....

 

so i wouldnt be able to just use the amp for the exsiting speakers and just add the infinity head unit and sub. i have the same amount of speakers just not infinity and no sub

 

You should be able to hook it up as a regular after market install I would think I have not done anything to mine. But if the wires are like he says they are bypass run new speaker wire to the amp. If that would.n't work go aftermarket and hook eveything up on a jacks. You'll get crisper sound that way anyway.

 

i was talking to one of the mitsubishi techs and he did not know about the wireing for two different systems so i think that i am going to go with an after market system this is becomming to much of a headache just for a system that doesnt hit that hard anyway.

 

I just bought a new kenwood kdc-x789 and i tried to install in my RA sun/sound and I am not geting any sound to the speakers. Im geting power but no sound can some one help me.

 

You are going to have to bypass the factory amp probly I had that same problem with a nissan maxima with the BOSE system. And i had to do that.

 

search soundgate adapter, or head unit adapter. you will find what you are looking for.

 

the soundgate one is really easy to use. its color coded.... lol