Notices
04-06 Ralliart Engine/Drivetrain (no forced induction)

Which Muffler

Thread Tools
 
Search this Thread
 
Old Jan 27, 2005 | 06:01 PM
  #16  
DiamondWhite's Avatar
Thread Starter
Evolved Member
 
Joined: Jan 2005
Posts: 744
Likes: 0
From: Nanty Glo, Pa
Originally Posted by jbizzle
from what i've heard the cel light only comes on if there is no cat. so if you get a hi flow cat then you should be fine. if your still looking for a nice muffler, the hks mufflers are extremely nice they have a deep rumble to them, as long as the inlet to the muffler is the same diameter as the piping you should have a decent sound.
I want to go 2.5 but i'm just going to work with a muffler for the time being
Reply
Old Jan 27, 2005 | 07:10 PM
  #17  
blk-majik's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 2,325
Likes: 1
From: CO
Look at the Megan Racing universal muflers. they are pretty cheap (even cheaper on ebay!) and are acutually of pretty good quallity. alot of evos in my area use them and they sound nice and deep. look hot too. they make a good CF one if ur into that
Reply
Old Jan 28, 2005 | 12:46 AM
  #18  
Ralliartboy's Avatar
Evolving Member
 
Joined: Aug 2004
Posts: 111
Likes: 0
From: California (Bay Area)
i got my RS type muffler for $90 bucks. PM me if you want to get one for that price..i know somebody who can get you one..even free shipping probably.


the RS type muffler is pretty good..b4 i had a downpipe people were telling me it sounded like a greddy exhaust..
Reply
Old Jan 28, 2005 | 06:55 AM
  #19  
Alliedcries's Avatar
Evolving Member
 
Joined: Jan 2005
Posts: 164
Likes: 0
From: Royal Oak, MI
Anyone know the part number on the rrm axle back muffler?
Reply
Old Jan 28, 2005 | 01:51 PM
  #20  
DiamondWhite's Avatar
Thread Starter
Evolved Member
 
Joined: Jan 2005
Posts: 744
Likes: 0
From: Nanty Glo, Pa
I think i'm going to get the RRM Axleback muffler here soon.
Reply
Old Jan 28, 2005 | 04:00 PM
  #21  
ricemonsta's Avatar
Newbie
 
Joined: Sep 2003
Posts: 2
Likes: 0
From: canada
Greddy

a little off topic but will the Greddy evo2 system for the oz lancer fit the ralliart?
what mods are needed?
Reply
Old Jan 28, 2005 | 04:45 PM
  #22  
DiamondWhite's Avatar
Thread Starter
Evolved Member
 
Joined: Jan 2005
Posts: 744
Likes: 0
From: Nanty Glo, Pa
Originally Posted by ricemonsta
a little off topic but will the Greddy evo2 system for the oz lancer fit the ralliart?
what mods are needed?
if i could get a look under a OZ and lift my car tomorrow i could tell you but seeing as everything is differnt from us and the oz, i'd put money on No.

if they could, i'd go with the magnaflow OZ exhaust


Final Decision,

Ultimate Racing Mid-pipe, no resonator, RRM Axelback exhaust.

Last edited by DiamondWhite; Jan 28, 2005 at 07:18 PM.
Reply
Old Feb 11, 2005 | 08:02 PM
  #23  
LancerMMC's Avatar
Evolving Member
iTrader: (2)
 
Joined: Dec 2004
Posts: 381
Likes: 0
From: Charleston, SC
GReddy vs Magnaflow.

Which is best? For the longest time I've waited for a GReddy Evo 2 exhaust system for my 04 ES, but they still haven't made one. RRM has the Magnaflow for a hundred less than the GReddy and everyone here seems to say it's a good exhaust system.

I'd also like to get the RRM testpipe for it too considering it's not that expensive. If I were still in California and subject to CARB smog checks I wouldn't bother. But South Carolina doesn't have vehicle inspections. Plus if they did I doubt the beat up pick up trucks with a gun rack in the back a giant rebel flags all the rednecks drive would pass the inspection anyway.

I'm also interested in the header and intake manifold, but I'm concerned about the CEL.
Reply
Old Feb 11, 2005 | 08:07 PM
  #24  
blk-majik's Avatar
Evolved Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 2,325
Likes: 1
From: CO
if you can find a greddy evo2 muffler for under $250, its a bargan, but u can usually only find them in a kit. THEY ARE NOT CHEAP! they kick ***, but i dont think they are worth the coin.

ralliart boy has a PM coming =)
Reply
Old Feb 11, 2005 | 08:16 PM
  #25  
Red Dragon's Avatar
Evolved Member
iTrader: (17)
 
Joined: Jul 2003
Posts: 1,293
Likes: 0
From: Saskatoon, Canada
does any one know if a greddy cat back exhaust is coming out
Reply
Old Feb 11, 2005 | 08:30 PM
  #26  
pinoynoskillz's Avatar
Evolved Member
 
Joined: Apr 2004
Posts: 575
Likes: 1
From: Fairview Heights, Illinois
ok questions... if i just buy a muffler, what else do i need to install it? (weld it)
Reply




All times are GMT -7. The time now is 03:36 AM.